Thread Number: 36853  /  Tag: 80s/90s Vacuum Cleaners
making a kirby sanitronic head fit other machines
[Down to Last]

Vacuumland's exclusive eBay Watch:
scroll >>> for more items
Post# 394153   7/1/2018 at 12:38 by Punisher_4u (wisconsin)        

I have a kirby sanitronic head that I bought to fit on my heritage 2. While I had it apart for cleaning I compared the belt lifter assembly to one from an avalir. I ended up 3d printing a bushing that allows the avalir belt lifter to be installed on a sanitronic head. A little plastic needed to be trimmed to clear the stop screw. It assembles and works the same as on the avalir.

I saw a video of someone using a heritage nozzle on a g4.



I tried it with an avalir. The hooks on the newer vacuums are wider so the old nozzle can't go on centered. I offset it to the left side. It locks in place and the belt can be installed. I 3d printed a little block to press in on the safty switch. It vacuums like normal.


  Photos...       <              >      Photo 1 of 7         View Full Size



Post# 394156 , Reply# 1   7/1/2018 at 13:05 by Lesinutah (Utah)        
Hey

lesinutah's profile picture
I put my g4 on d80 it fit funky. You can get most heads to interchange if you modify wiring of safety switch. Where i live in classifieds a guy is selling heritage 2 with sanatronic nozzle. He had to. Do something to safety switch.

Post# 394157 , Reply# 2   7/1/2018 at 14:15 by KirbyClassicIII (Milwaukie, Oregon)        
Punisher_4u

kirbyclassiciii's profile picture
Chris,

Believe it or not the Heritage (84), Heritage II (Legend) and Legend II actually did have the 13" nozzle as an option.

You are right, too, that the G3/G4 nozzle (and other front-mounted accessories like the hose and the Carpet Cleaning System nozzle casting) will not work on models G5 to the present Avalir II due to the fan case and gasket design.

~Ben


  View Full Size


This post was last edited 07/01/2018 at 19:08
Post# 394159 , Reply# 3   7/1/2018 at 15:26 by luxflairguy (Wilmington, NC)        

It's true! I ordered my Heritage II with both heads and prefer the 13 inch head, especially now that it has a 4 row brushroll.

Post# 394183 , Reply# 4   7/2/2018 at 00:27 by Lesinutah (Utah)        
Hey

lesinutah's profile picture
Lux flair guy
Where did you krxer 13 inch nozzle.

Les


Post# 394185 , Reply# 5   7/2/2018 at 01:49 by MadMan (Chicago, IL, USA)        

madman's profile picture
Neat.

Post# 394970 , Reply# 6   7/14/2018 at 23:14 by Rivstg1 (colorado springs)        
luxflairguy, where

rivstg1's profile picture
did you get the 13'' 4 row brush? I want one for my dual sanitronic 80, can't find one.

Post# 395044 , Reply# 7   7/15/2018 at 22:30 by Lesinutah (Utah)        
Hey

lesinutah's profile picture
Greetings
Ironic luxflairguy asked me the same question.
A007kirby guy is who you need to talk to.
Les
He said I can give info out but only pm or email
Les


Post# 395122 , Reply# 8   7/16/2018 at 23:29 by chicagomike (Plover, WI)        
Look closely at video

chicagomike's profile picture
Look closely at video - the safety switch plugs are missing --- thus the vacuum will turn on and run without anything attached to the vac.

Post# 395130 , Reply# 9   7/17/2018 at 06:18 by blackheart (North Dakota)        
Once upon a time.

I modded an old 500 series head to work with the H-L2 speed switch I just drilled a hole in the back of the nozzle, screwed in a bolt and then snapped it off at a proper distance so that low speed would be triggered.

I also bought a Heritage II with the proper small head but I couldn't justify keeping two machines around that were so similar, so i kept the small head and found a spare H2 large head and gave that to a friend who needed a vacuum. It wasn't until later i realized that the headlight "cap" is a little different to accommodate the raised edges on the top of the small nozzle.


  View Full Size
Post# 395131 , Reply# 10   7/17/2018 at 06:47 by luxflairguy (Wilmington, NC)        
4 row brushroll

Kelton!

Sorry I didn't see your posting. Les gave you the answer and as an upgraded member you can use the in-house messaging to talk with Bill. He still has a limited # of brush rolls for sale. Price is equivalent to Ebay. Greg





Forum Index:       Other Forums:                      



Comes to the Rescue!

Woops, Time to Check the Bag!!!
Either you need to change your vacuum bag or you forgot to LOG-IN?

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy