Thread Number: 36101
/ Tag: 80s/90s Vacuum Cleaners
Legend II Rear Axle |
[Down to Last] |
Post# 387110 , Reply# 1   3/3/2018 at 17:17 (2,237 days old) by Lesinutah (Utah)   |   | |
Checkrate/Likes
 
     
|
Post# 387129 , Reply# 2   3/3/2018 at 18:51 (2,236 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
Bryan,
Believe it or not, the Legend II was the last Kirby that the shake out bag was an optional feature for (and obviously, not many civilians bought it that way), and this is why two different rear axles were available. The long 6" axle was used if these machines had the standard Mini Emtor (disposable bag system), but those machines ordered with the shake out bag would have used the short 4.5" axle. ~Ben |
Post# 387131 , Reply# 3   3/3/2018 at 19:21 (2,236 days old) by bryan1980 (Texas)   |   | |
Checkrate/Likes
 
     
It's the screws for the axle that keep breaking |
Post# 387136 , Reply# 4   3/3/2018 at 19:51 (2,236 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
Bryan,
The exact replacement screws you need are given as part number 102269 by Kirby. If you think you're having trouble removing them, try an impact driver with an "E-Z Out" bit. ~Ben This post was last edited 03/03/2018 at 22:23 |