Thread Number: 35480
/ Tag: Recent Vacuum Cleaners from past 20 years
Kirby Drive leavers and other small changes |
[Down to Last] |
Post# 381372   11/15/2017 at 12:45 (2,351 days old) by vacuumdevil (Vacuum Hell )   |   | |
Checkrate/Likes
 
     
Why the differences between a Kirby G3 in a Kirby G10 or quite minor. It's the details that sometimes makes sense and sometimes don't. Particularly why a Kirby Drive bracket cam lever #557689 on a G3 never wears out but after the G5 version it does even though the parts seem to be identical. Also what was up with the half cooling vent?
Kirby and there changes and why they were made over the years? |
Post# 381387 , Reply# 1   11/15/2017 at 17:55 (2,350 days old) by blackheart (North Dakota)   |   | |
Checkrate/Likes
 
     
|
Post# 381430 , Reply# 2   11/16/2017 at 10:13 (2,350 days old) by Ultralux88 (Denver, Colorado)   |   | |
Checkrate/Likes
 
     
Either of both of these parts going bad will make the drive click when you push the machine in neural while off. The cam lever gets replaced on most Kirbys these days, as most show a ton of wear, and the cam/pedals, the cam can wonder down the shaft and eventually fall off, letting the pedals fall out the back! |
Post# 381466 , Reply# 3   11/17/2017 at 05:19 (2,349 days old) by huskyvacs (Gnaw Bone, Indiana)   |   | |
Checkrate/Likes
 
     
|