Thread Number: 35337
/ Tag: 50s/60s/70s Vacuum Cleaners
D80 attachments |
[Down to Last] |
Post# 380159   10/22/2017 at 22:19 (2,348 days old) by Lesinutah (Utah)   |   | |
Checkrate/Likes
 
     
|
Post# 380161 , Reply# 1   10/22/2017 at 23:14 (2,348 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
Les,
Yes, the Handi-Butler was made for both the D50 and D80, known as the "Mark IV," which continued to be available up to the Classic Omega 1CB; when revamped for the Classic III 2CB, it lost the Handi-Sharpener and wire wheel, but added the jig saw (or "Sabre Saw"). It was available in all the respective trim colors. ~Ben |
Post# 380177 , Reply# 2   10/23/2017 at 12:10 (2,347 days old) by Lesinutah (Utah)   |   | |
Checkrate/Likes
 
     
|
Post# 380179 , Reply# 3   10/23/2017 at 12:47 (2,347 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
1    
Les,
Handi-Butler history: "Mark I": 1949 to 1958 (models: 509 to 518) "Mark II": 1958 to 1962 (models: 518 to 561) "Mark III": 1962 to 1965 (models: 562 Sanitronic and Sanitronic VII) "Mark IV": 1965 to 1976 (models: Dual Sanitronic 50, Dual Sanitronic 80, Classic 1CR and Classic Omega 1CB) "Mark V": 1976 to 1983 (models: Classic III 2CB, Tradition 3CB and Heritage 1HD) Yes, the "Mark IV" design did first appear on the Dual Sanitronic 50, and the same applied to the Dual Sanitronic 80. ~Ben |
Post# 380180 , Reply# 4   10/23/2017 at 13:19 (2,347 days old) by Lesinutah (Utah)   |   | |
Checkrate/Likes
 
     
|
Post# 380181 , Reply# 5   10/23/2017 at 13:26 (2,347 days old) by Lesinutah (Utah)   |   | |
Checkrate/Likes
 
     
|
Post# 380182 , Reply# 6   10/23/2017 at 13:44 (2,347 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
|