Thread Number: 34698
/ Tag: 50s/60s/70s Vacuum Cleaners
My Kirby collection |
[Down to Last] |
Post# 374778   7/1/2017 at 16:28 (2,484 days old) by toastermike (Milwaukie Oregon)   |   | |
Checkrate/Likes
 
4    
I displayed my entire Royal collection a while back and thought I would do the same with my entire (and much smaller) Kirby collection. Left to right: 509, 560, Dual Sanitronic 80, Classic III, Legend II and matching Vacuette. The 509 and DS 80 are fully restored, and the others are in their beautiful original condition. The DS 80, Classic III, and Legend II are all complete with all of the accessories. Not shown is a 512 that I am going to restore and customize in black because that model and myself were both built in 1952.
|
Post# 374781 , Reply# 1   7/1/2017 at 18:30 (2,484 days old) by kirbyvacuum (Long Island New York)   |   | |
Checkrate/Likes
 
2    
WOW LoVE your Kirbys |
Post# 374790 , Reply# 2   7/2/2017 at 01:25 (2,483 days old) by kirbyds80 (California)   |   | |
Checkrate/Likes
 
     
Wow, nice little collection. -Jay |
Post# 374816 , Reply# 3   7/2/2017 at 19:12 (2,483 days old) by broomvac (N/A)   |   | |
Checkrate/Likes
 
     
Toastermike, I must commend your Kirby collection. A good selection of machines, all in top condition. I particularly like the 509 and the 560. I'd love to get my hands on some more of the older Kirbys like those again.
I must admit, I have never seen one of those large nozzles in a Legend II. However, I have seen them on the Heritage II/Legend. Is that nozzle original or is it a Heritage/Heritage II nozzle dressed up in Legend II trim? Incidentally, I just acquired the Craftsman cousin to your Vacuette and am in the process of cleaning it up right now. CLICK HERE TO GO TO broomvac's LINK |
Post# 375092 , Reply# 5   7/10/2017 at 00:01 (2,475 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
Mike,
I am soon to be the owner of a 1987 Heritage II with a shake-out bag! ~Ben
View Full Size
|
Post# 375109 , Reply# 6   7/10/2017 at 09:59 (2,475 days old) by kloveland (Tulsa)   |   | |
Checkrate/Likes
 
1    
|
Post# 375143 , Reply# 7   7/11/2017 at 03:19 (2,474 days old) by toastermike (Milwaukie Oregon)   |   | |
Checkrate/Likes
 
     
Broomvac, this is the original nozzle. I often find Legend II's, all with large nozzles. I would like to find a small one for it someday. My understanding is the small nozzle was an option and was an old 500 series nozzle with the newer belt lifter and bumper fitted. Maybe I could make my own with spare parts!
Mike |
Post# 375144 , Reply# 8   7/11/2017 at 03:23 (2,474 days old) by toastermike (Milwaukie Oregon)   |   | |
Checkrate/Likes
 
     
|
Post# 375145 , Reply# 9   7/11/2017 at 03:25 (2,474 days old) by toastermike (Milwaukie Oregon)   |   | |
Checkrate/Likes
 
1    
|
Post# 375183 , Reply# 10   7/11/2017 at 20:54 (2,474 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
What an early Heritage II nozzle looked like (1984-1985 - 1st picture), and what a small nozzle from the same machine had looked like (2nd picture)... as you can see, the only casting change made to the small HII head from the Sanitronic 562 version, aside from the blanked-out space where the suction relief vent would be (covered up by the belt lifter instruction decal, but if you look inside the casting you can still make out the indentations for the vent), was the additional nodule to support the speed switch for the Heritage/Legend series, although the small nozzle casting for the Heritage I/84 (and some early HII small heads--mine not one of them, of course) also had another additional nodule to support the speed switch for the Classic Omega/III/Tradition.
~Ben This post was last edited 07/11/2017 at 21:09 |
Post# 375202 , Reply# 11   7/12/2017 at 03:02 (2,473 days old) by kirbyklekter (Concord,Ca.)   |   | |
Checkrate/Likes
 
     
Thank you for the heads up on the 562! Billy |
Post# 375205 , Reply# 12   7/12/2017 at 07:30 (2,473 days old) by gsheen (Cape Town South Africa)   |   | |
Checkrate/Likes
 
     
Mike I Love the kirbys They looks awesome.
On the large Heritage II large nozzle does anyone know if these were fitted to export units. I have a few Heritage ii,s and most are 84 to 85 models according to the stamps underneath, I also have a vacuum shop and we specialize in Kirby's. Never seen one of these older style nozzles |
Post# 379225 , Reply# 13   10/4/2017 at 11:06 (2,389 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
Mike,
And here it is (I acquired it July 25)! As you may or may not know, not everything on it is quite right. To start with, I have already changed out the axle to the shorter one, as you can see in picture #2. The last thing I want to find for this is the original black hammertoned Sani Emtor (179984S), but as that is quite rare to find these days, my next best option is the polished Sani Emtor (180069S, 179978S) as used on the Classic 1CR up to the Tradition 3CB--the Sani Emtor I have on my machine presently is from a Heritage I 1HD. ~Ben |
Post# 379235 , Reply# 14   10/4/2017 at 17:08 (2,389 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
|