|
Thread Number: 32469
/ Tag: 80s/90s Vacuum Cleaners
Front belt Cover Plate for Vintage Royal Upright |
[Down to Last] |  |
| Post# 356490 , Reply# 1 7/23/2016 at 11:05 (2,826 days old) by myles_v (Fredericksburg, VA) | ||
Here's one-it's not an exact color match but it should work. It does have the adjust-o-rite feature, I wonder if the flap that newer commercial Royals use (w/out the adjust-o-rite) would work-someone else might be able to answer that question.
CLICK HERE TO GO TO myles_v's LINK on eBay | ||
| Post# 356491 , Reply# 2 7/23/2016 at 11:34 (2,826 days old) by fantomfan57 (Central Texas) | ||
|
Another source..... This company is exceptional. This is the link directly to the available covers. Good luck. CLICK HERE TO GO TO fantomfan57's LINK | ||
| Post# 356522 , Reply# 3 7/24/2016 at 00:39 (2,826 days old) by myles_v (Fredericksburg, VA) | ||
|
Garry... | ||
| Post# 356529 , Reply# 4 7/24/2016 at 16:00 (2,825 days old) by 3rdGenVacGuy (Columbus, Ohio ) | ||
|
adjust -o- rite I have an extra, It might be for an older model than yours, but the hole is the same. $7 shipped. | ||
Post# 356532 , Reply# 5 7/24/2016 at 17:30 (2,825 days old) by KirbyClassicIII  (Milwaukie, Oregon) |
||
cynthia, 3rdGenVacGuy
Cynthia, and Kurt,
The 85103 apparently used the same light blue Adjust-O-Rite cover plate as models 790, 880, 881, 883, 884 and pre-1991 886/887 models. The exact original part number was: 2-080169-200. ~Ben
View Full Size
| ||
| Post# 356655 , Reply# 6 7/26/2016 at 08:41 (2,823 days old) by cynthia (Nellysford) | ||
|
Belt Cover Thank you all so much. I really appreciate the help and information. 3rd Gen Vac Guy, I'll be in touch. | ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
;){kind=link}
;){kind=link}