|
Thread Number: 31783
/ Tag: 50s/60s/70s Vacuum Cleaners
Kirby Sanitronic VII Height Adjustment Problem |
[Down to Last] |  |
| Post# 350814 , Reply# 1 4/22/2016 at 02:58 (2,918 days old) by compactc9guy (Bathurst NB) | ||
 | ||
| Post# 350827 , Reply# 2 4/22/2016 at 12:03 (2,917 days old) by sptyks (Skowhegan, Maine) | ||
 | ||
| Post# 350839 , Reply# 3 4/22/2016 at 20:06 (2,917 days old) by Blackheart (North Dakota) | ||
Hit it with a hammer!
That's what the local shop instructed me to do when i had that same problem with a Heritage II, over time the stationary toothed area can work loose and cause that slippage, i was told to remove the axle and the spring loaded petal and tap the stationary part with a hammer to tighten it. It worked well for the Heritage II.
View Full Size
| ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
