Thread Number: 29903  /  Tag: 80s/90s Vacuum Cleaners
HELP PLEASE with foot release pedal!!
[Down to Last]

Vacuumland's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate vacuumland.org if you make a purchase using any link to eBay on this page]
Post# 332676   8/28/2015 at 08:28 (3,135 days old) by classicfan1 (Ohio, USA)        

I'm finishing my rebuild of this Panasonic and I'm trying to get the foot release pedal back on. What am I doing wrong? Can anyone take pictures of their vacuum and post them? The pics I have before I took it apart aren't too good!

On the bright side, this dirty dog cleaned up GREAT! New cord, new light, new belt, motor cleaned, it just purrs!

This is how it sits right now:


  Photos...       <              >      Photo 1 of 3         View Full Size
Post# 332706 , Reply# 1   8/28/2015 at 17:03 (3,135 days old) by classicfan1 (Ohio, USA)        
???

Anybody?

Post# 332763 , Reply# 2   8/29/2015 at 16:50 (3,134 days old) by vacuumlad1650 (Wauponsee, IL)        

vacuumlad1650's profile picture
Thats similar to my Panasonic built Kenmore. I will go check that right now

Post# 332766 , Reply# 3   8/29/2015 at 17:17 (3,134 days old) by vacuumlad1650 (Wauponsee, IL)        

vacuumlad1650's profile picture
So I checked my Kenmore, and its a different release entirely. I think this is like the Kenmore Whispertones, so maybe someone with one of those can help?

Post# 332936 , Reply# 4   8/31/2015 at 18:48 (3,132 days old) by classicfan1 (Ohio, USA)        
Bumpity...

Bumpity boo...anybody?

Thanks, vacuumlad! It was worth a try!


Post# 332937 , Reply# 5   8/31/2015 at 19:04 (3,132 days old) by vacuumlad1650 (Wauponsee, IL)        

vacuumlad1650's profile picture
No problem! If i see anybody with a whispertone upright, ill send them here

Post# 333454 , Reply# 6   9/7/2015 at 18:24 (3,125 days old) by classicfan1 (Ohio, USA)        
Still no idea...

...I've been fighting off an allergy infection and this thing still isn't back together right.

Post# 333468 , Reply# 7   9/7/2015 at 22:15 (3,125 days old) by Impfac ()        

I've disassembled and sold parts from at least 50 Kenmore uprights. You probably broke some of the plastic holding something in place. Also, you should be getting at these parts by laying the vacuum down and removing the four screws around the motor cover, if its upright and the back is gone, I think you've messed up.

Time to replace your vacuum. You'll never get that release pedal working again, plus its missing the filter exaust cover, meaning its just spewing dust into the air. If you have allergies, you need a new vacuum.

With these things, you shouldn't need to do much more than remove the lower cover and possibly motor cover to clean them out. Don't get to the point you're trying to force the handle release back on, by then you've gone too far, trust me. Once you take the handle release out, it often causes internal plastic to break so it won't go back in the same.

Start haunting thrift stores, find another kenmore. I see them every week. The direct drive ones are pretty damn nice. (PS, I could have looked it up using the model number starting with 116).


Post# 334726 , Reply# 8   9/28/2015 at 10:18 (3,104 days old) by classicfan1 (Ohio, USA)        
Spare time...

I finally have some spare time to work on this thing again.

My allergy attack happened when visiting family and the ragweed and pollen were very high. I don't usually have that problem.

I checked everything on the base and pedal and nothing is broken. I just can't get it re-aligned but I'll try laying the vacuum down flat on the floor like you suggested.

Also, it's not missing anything, especially not a filter cover. I took a careful inventory of everything as I took it apart. I don't know what you're seeing or not seeing.

If I knew it was going to be this much trouble I would junked the damn thing. I forgot why I haven't messed with vacuum rebuilding for years.



Forum Index:       Other Forums:                      



Comes to the Rescue!

Woops, Time to Check the Bag!!!
Either you need to change your vacuum bag or you forgot to LOG-IN?

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy