Thread Number: 29860  /  Tag: Pre-1950 Vacuum Cleaners
Progress on my Universal E720 		[Down to Last]

Vacuumland's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate vacuumland.org if you make a purchase using any link to eBay on this page]
Post# 332285   8/23/2015 at 01:32 (3,166 days old) by chad (texas)        

Started work this morning on mt E720, since my parts unit came in the mail the other day. I typically don't document anything I do, but since it's a "rare" model....

  View Full Size
Post# 332286 , Reply# 1   8/23/2015 at 01:36 (3,166 days old) by chad (texas)        

The armature was dated 1923. Unit one had a bum armature, but the unit two armature looked like it was new after lots of cleanup. These things have zinc bushings, and they swell and seize. Trust me, no amount of oil will help it. I normally lap the bushing with some valve compound and an old armature, but was lazy and used my aluminum polishing compound to do the same thing. Here's the offending bushing (one of them anyhow), with the fields gutted out of it.

  View Full Size
Post# 332287 , Reply# 2   8/23/2015 at 01:38 (3,166 days old) by chad (texas)        

Here,s the motor assembly all cleaned up and lots of oxidation removed. It still needs a good polish jub, but hell, so do I.

  View Full Size
Post# 332288 , Reply# 3   8/23/2015 at 01:44 (3,166 days old) by chad (texas)        

The motors on these things should zip up, and sound like any other upright, and not sound labored. The armature should spin by hand without any drag with the brushes removed. Here's a pic of the so called revolutionary cordless motor. The copper tabs on either sides by the pivots make a contact with the handle, hence there's no wire to bend. I took this opertunity to test run mine. I don't have a variable voltage power supply, but I have a pedal off of a singer sewing maching I use to test run them. This one runs really good.

  View Full Size
Post# 332289 , Reply# 4   8/23/2015 at 01:49 (3,166 days old) by chad (texas)        

And, a picture of her sexy hind end, because, why not? These things have two brass screws you remove with wicks in them that hold oil for the bushing. I like to wash them with brakeclean, while apart and let them air dry for a few days before putting a few drops of oil on them. That's it for now, I'll be working on the handle afore long.

  View Full Size
Post# 332292 , Reply# 5   8/23/2015 at 07:46 (3,166 days old) by suckolux (Yuba City, CA)        

suckolux's profile picture
Nice work! Interesting, thanks for sharing

Post# 332558 , Reply# 6   8/25/2015 at 22:19 (3,163 days old) by Jdelise (Cleveland )        

Looks great, can tell you are putting a lot of work into the project.


Forum Index:       Other Forums:                      


Comes to the Rescue!

Woops, Time to Check the Bag!!!
Either you need to change your vacuum bag or you forgot to LOG-IN?

Discuss-O-MAT Log-In



New Members Click Here To Sign Up.



                     

automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
 Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals 		Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy