Thread Number: 26208
My Heritage II 13" Nozzle |
[Down to Last] |
Post# 293758   8/15/2014 at 21:41 (3,512 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
1    
Here's all the pictures of my Heritage II 13" nozzle from Mark F. (marks_here) and the brush and belt that came with it.
The brush roll, being a sleeve-bearing design, will soon need new casings for the end caps (part nos. 1539 and 1540). I am led to believe the knurled belt just might be the cause for these warped plastic casings. I am not about to hunt for the ball-bearing equivalent of this brush roll just yet, as I want to see whether or not the main brush ends will need replacement too. ~Ben |
Post# 293769 , Reply# 1   8/15/2014 at 22:23 (3,512 days old) by a007kirbyman (--->> Originally My Mom <<--- (now Wisconsin))   |   | |
Checkrate/Likes
 
     
Hello Ben.
It was very nice that Mark was able to assist you in acquiring a 13" Heritage style nozzle. The reason the large end cap is all 'chewed up' is that somewhere along the line, someone put the brushroll in backwards. That is also the reason that the belt 'track' shows going over some of the bristles. The rest of the brushroll [ie: sleeve bearings] may or may not still be OK?!?! However, that said, I would NOT use the knurled belt with this style brusroll anymore. (imho ~~lol~~) Cheers & hagwknd all, Bill 015 |
Post# 293770 , Reply# 2   8/15/2014 at 22:31 (3,512 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
|
Post# 293773 , Reply# 3   8/15/2014 at 22:48 (3,512 days old) by marks_here (_._)   |   | |
Checkrate/Likes
 
1    
|
Post# 293774 , Reply# 4   8/15/2014 at 22:48 (3,512 days old) by a007kirbyman (--->> Originally My Mom <<--- (now Wisconsin))   |   | |
Checkrate/Likes
 
     
|
Post# 293777 , Reply# 5   8/15/2014 at 23:35 (3,512 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
|
Post# 293789 , Reply# 6   8/16/2014 at 00:51 (3,512 days old) by super-sweeper (KSSRC Refurbishment Center)   |   | |
Checkrate/Likes
 
     
|
Post# 293798 , Reply# 7   8/16/2014 at 01:54 (3,512 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
|
Post# 302119 , Reply# 8   10/17/2014 at 00:59 (3,450 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
|
Post# 302137 , Reply# 9   10/17/2014 at 09:42 (3,449 days old) by suckolux (Yuba City, CA)   |   | |
Checkrate/Likes
 
     
|
Post# 302185 , Reply# 10   10/17/2014 at 17:08 (3,449 days old) by super-sweeper (KSSRC Refurbishment Center)   |   | |
Checkrate/Likes
 
     
|
Post# 302271 , Reply# 11   10/18/2014 at 11:36 (3,448 days old) by sptyks (Skowhegan, Maine)   |   | |
Checkrate/Likes
 
     
|
Post# 302275 , Reply# 12   10/18/2014 at 12:21 (3,448 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
|