Thread Number: 25541
when did they leave this ball game?
[Down to Last]

Vacuumland's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate vacuumland.org if you make a purchase using any link to eBay on this page]
Post# 286821   7/1/2014 at 21:13 (3,558 days old) by vacuumssuck213 ()        

Who can tell me when these brands got out of the fun business Westinghouse now made popular for blenders and mixers once produced vacuum cleaners general electric the appliance giant to my knowledge does not produce a vacuum. Singer a popular sewing machine manufacturer made vacuums even companies like Toshiba and Sony had a few when did they disappear and why?


Post# 286823 , Reply# 1   7/1/2014 at 21:16 (3,558 days old) by super-sweeper (KSSRC Refurbishment Center)        

super-sweeper's profile picture

1: Westinghouse left vacuums sometime in the 1960s.

 

2: G-E pulled out of vacuums in 1973, and sold there molds and vacuum-everything to Premier.

 

3: The Singer line of vacuums was bought-out by Bissell in the late 1990s. Just like G-E, Bissell began to produce the same machine with their name on it.

 

Hope this helps!


Post# 286827 , Reply# 2   7/1/2014 at 21:20 (3,558 days old) by vacuumssuck213 ()        
thanks

Just what I was looking for shame we live in a society where everything is a dulled down copycat

Post# 286828 , Reply# 3   7/1/2014 at 21:34 (3,558 days old) by kirbyrama (Pennsylvania)        

And how about Sunbeam? When did they get out of vacuum cleaners?

Post# 286846 , Reply# 4   7/2/2014 at 00:37 (3,558 days old) by super-sweeper (KSSRC Refurbishment Center)        
Sunbeam,

super-sweeper's profile picture

Left in the late 1970s. Some of their last vacuums were also some of their best, such as the touch-and-lock, and the infamous Flower-Power Challenger canister. Singer also made some uprights for them in the late 1960s and early 1970s!


Post# 286851 , Reply# 5   7/2/2014 at 00:56 (3,558 days old) by kirbyvertibles (Independence, KS)        

kirbyvertibles's profile picture
Regina, samsung, sanyo, sharp, airway, oasis, fantom, whirlpool, bison, westinghouse. All gone

Post# 286856 , Reply# 6   7/2/2014 at 01:18 (3,558 days old) by super-sweeper (KSSRC Refurbishment Center)        

super-sweeper's profile picture

So, does that mean I have to tell all their stories, too, Kirbyvertibles?tongue-out


Post# 287853 , Reply# 7   7/8/2014 at 23:18 (3,551 days old) by hygiene903 (Galion, OH)        

hygiene903's profile picture
Yep!
Jeff


Post# 287859 , Reply# 8   7/9/2014 at 00:56 (3,551 days old) by kirbyvertibles (Independence, KS)        

kirbyvertibles's profile picture
go for it super-sweeper

Post# 287870 , Reply# 9   7/9/2014 at 02:16 (3,551 days old) by super-sweeper (KSSRC Refurbishment Center)        
ok then!

super-sweeper's profile picture

I have to rewrite everything now, on a tablet! All my text randomly deleted!!! yelltongue-out

 

Regina packed up in the 1980s, when it was purchased for $38 million dollars. It was then sold to Phillips in 1995, and sold to Oreck in 1997. Oreck made the Regina steamer as their own. Oreck then sold Regina to Royal, which ended up being acquired by TTI. The Regina name was then put on the Dirt Devil Breeze vacuums, bagged and bagless. The Regina variations were made in black plastic!

 

Samsung is still around, you can find their new (and UGLY!tongue-out) Motion Sync vacuum at Best Buy (I wonder if Wards has it in their catalog?tongue-out).

 

Sanyo left in the early 2000s. They were best known for the Tranaformax stick vac, which ranked VERY highly in Consumer Reports. They also made the Kenmore 'Let's Clean!' Canister in the 1980s.

 

Sharp also left in the early 2000s. They made good vacuums, compared best to Panasonic. They were well known for the Twin Energy and Library Quiet upright!

 

Airway, the company of so many innovations, ceased manufacturing the then-current Signature series in 2008. The rising cost of steel and aluminum made American manufacturing too expensive.fun fact: the DeLorean's stainless steel body was made in Ireland due to costs!

 

I've never heard of Oasis!tongue-out

 

Fantom filed for bankruptcy in October 2001. James Dyson decided not to renew the licensing of his Dual-Cyclonic technology when Fantom told Dyson they refused to use his new MEMA filtering technology. This sent Fantom in a downward spiral.they released the Wildcat, and it failed. Fantom stopped honoring warranty claims, and went broke. The name sold to Euro Pro. Some 'commercial' and some not-so-'commercial' vacuums under the Fantom name in China.

 

Whirlpool stopped with vacuums in the late 1980s to early 1990s. They had been Kenmore's right-hand man for their vacuums for so many years. They sold many Kenmore machines under their own name since the 1960s. I think Macy's carried them in the 1980s!

 

Bison folded around 1984. They had a BAD reputation. The legend goes that the distributor would lock all the salesmen in a room, then preach extensively to them. He would conclude with '....and I had better not hear of my machines being sold to black people or in trailer parks!'. Combined with the faults in their machines, they went down in vacuum history. Their last model was the Centurion II.

 

Westinghouse ended with their take on the Eureka Bravo in the 1990s. I know of ONE collector here that has one fully intact, another has just the base. Now, WHITE-Westinghouse made their last debut on the infamous Westinghouse Unplugged vacuum of 2001! 

 

That completes our trip to the vacuum history database, feel free to take a bobble-head Electrolux on your way out! winklaughing


Post# 287871 , Reply# 10   7/9/2014 at 02:21 (3,551 days old) by super-sweeper (KSSRC Refurbishment Center)        
note:

super-sweeper's profile picture

Don't mind reply #2, I completely forgot about Westinghouse's V.I.P Bravo-look-alike, and the Unplugged!tongue-out


Post# 287895 , Reply# 11   7/9/2014 at 10:10 (3,550 days old) by DesertTortoise ()        

Meanwhile new firms like Tacony and LG have entered the vacuum making biz. don't forget Sharp and Emerson Electric. Both sell vacs. You also ignored some Japanese brands that are not typically seen outside of Asia such as Nikura (their top canister is listed at 2800 watts, obviously not something the EU would smile at!). Also don't ignore a US company called iRobot and their Roomba robot vacuum. The Japanese Concorbo robot talks in three languages, even some particular Japanese dialects and has an app that lets you communicate with it through a smart phone. Robot vacs are a game changer whether the old gray beard collectors like it or not. You mean I can have clean carpet and not have to push a vacuum around the house? I'm, like, there dude!

Btw, iRobot makes a lot of very trick military and police robots, from ground crawlers equipped with sensors, bomb disposal gear, grenade launcher/shotgun combos (thing is maybe knee high with two grenade launchers, 16 grenades and two shot gun barrels with reloads, nasty little critter) to autonomous submersibles used by the US Navy for a variety of covert underwater tasks. Trying to operate one of the ground robots smoothly with their hand held controller using the sensors on the robot viewed through a computer screen takes real skill and practice, but a demo by an Air Force robot the controller untied my boot with the robot arm! That level of tech can be cruising around your hose sucking up your dogs hair and whatever it tracked in. Pretty cool if you ask me.


Post# 287900 , Reply# 12   7/9/2014 at 10:36 (3,550 days old) by Dustin (Jackson, MI)        

dustin's profile picture
GE *Did* have a few models out in the early 2000's, sold only at Walmart, they were not true GE's though, but rebadged Eurekas.

Post# 287912 , Reply# 13   7/9/2014 at 11:41 (3,550 days old) by Gr8DaneDad ()        

DesertTortise,

 

I agree completely with your position, with one exception, robot vacuums may well become a game changer, but they aren't there yet. They are moderately effective on surface litter and hard floors but have neither the capacity nor power to deep clean a carpet and run time is still fairly limited. I have a Roomba and it does a lousy job in small rooms with a lot of furniture and often gets stuck under the edge of the sofa because it fits under some areas but then can't find a way out of others and will get stuck under a bit of trim or my favorite spot to find the darn thing, under the front of the lazy boy, run up part way on the base,  and then it can't get enough traction on the broadloom to back itself out. They have improved tremendously, but still have quite a way to go.

 


Post# 287915 , Reply# 14   7/9/2014 at 11:52 (3,550 days old) by marks_here (_._)        
And those robot vacuums

marks_here's profile picture
Are the most listed on Ebay for parts/repair vacuum...which is something considering how expensive they are they don't last.

Post# 287917 , Reply# 15   7/9/2014 at 11:53 (3,550 days old) by DesertTortoise ()        

Interesting to know Gr8DaneDad. I have wondered how they do in rooms with lots of furniture. Do they shut off after a period of time when they get stuck or just run until the battery quits.

With dogs dribbling water from the water bowl (both dogs drink then kiss over the bowl and water goes everywhere), or tracking water in on wet feet from the tub outside I was concerned about a robot vac sucking some water up, shorting out and catching fire while I am work blissfully ignorant of the catastrophy. Otherwise I would have one at least for the kitchen.


Post# 287943 , Reply# 16   7/9/2014 at 14:18 (3,550 days old) by Gr8DaneDad ()        

well it depends... on what I'm not sure, but most of the time it shuts off after not moving for some period of time but if it's wheels are just so, it'll run until the battery dies or maybe it just got stuck near the end of a charge... If I'm home I don't let it run because the younger 2 pups try to kill it, so it only gets exercise when the dogs are outside or limited to their room right off the garage and I don't witness it or I'm working in my office (which is really the dogs room, but they let me use it sometimes) and don't notice it's stuck. It also has a hell of a time if it runs off the carpet into the kitchen... it can't get back up on to the carpet and back to base.


Post# 287962 , Reply# 17   7/9/2014 at 14:42 (3,550 days old) by DesertTortoise ()        

Sounds like they need to make one on rubber treads. It would look like a powered brush with the brush the full width of the thing and treads behind the brush. Might even have some sort of automatic height adjustment to clear things like the junction of tile and carpet or permit it to mount an area rug from a hard surface.

Post# 287989 , Reply# 18   7/9/2014 at 17:48 (3,550 days old) by kirbylux77 (London, Ontario, Canada)        
Kirbyvertibles

kirbylux77's profile picture
You totally forgot about Lewyt when you made that list of vacuum companies that are gone.

Lewyt went bankrupt in the early 1960's, & bought out by SCM Corporation, which eventually put Lewyt out of business in the early 1990's. Then, around 1998 if I remember correctly, SMC Corporation, a producer of ceiling fans, bought the rights to the name & for a few years sold a line of cheap Chinese canisters & uprights. I think they finally shut things down around 2001 or 2002. Their vacuums were so cheap that when they took them to vac shop distribution companies, like Buckeye, they turned them down!

Super-Sweeper....Sanyo didn't leave in the early 2000's, they were bought out by Panasonic in 2009. Up to that point, they were still making vacuums under their own brand name, as well as rebadging vacuums for Euro Pro & Hoover. Even to this day, there are still a couple of Sanyo designs floating around with the Panasonic name on them.

Dustin....yes you are right, those WalMart GE's were made by Eureka. BUT important to note, however, that the upright designs were NOT shared by Eureka. The GE uprights were totally separate designs. The only other name they ever got was the Volta name, which was sold in Canadian Tire here in Canada. The only design Eureka vacuums ever shared with GE was their powerhead canister, & even then they did not get a quick-release PN neck or direct-connect plastic wands, just stainless steel wands.

As for the robot vacuums....in my opinion, they are NOT vacuums. They are merely robotic motorized carpet sweepers, which explains why they only surface clean. It will take another 20 years before they ever truly get to the point they could replace or clean as well as normal canister & upright vacuums, if they ever do get to that level. The fact that Dyson had a prototype of a full size robot vacuum that actually looked like a downscaled normal vacuum, & they didn't put it into production, tells me that it will probably never come to fruition.

One thing I am wondering....about Premier....when exactly did they separate from General Electric?? I know I read that Premier bought the GE designs in 1973, but I always thought that GE owned Premier & the Premier line was the lower cost line. And does anyone have any pics or information on the Sony vacuums? Now that definitely has me curious!

Rob


Post# 288034 , Reply# 19   7/10/2014 at 07:14 (3,549 days old) by eurekaprince (Montreal, Canada)        
White-Westinghouse

eurekaprince's profile picture
The story behind the appearance of White-Westinghouse vacs in the late 1980's is quite interesting:

In 1975, White Consolidated Industries - a large maker of major appliances (no relation to Electrolux USA's parent Consolidated Foods) bought Westinghouse's major appliance division. White Consolidated Industries (WCI) then created a brand name of major appliances called "White-Westinghouse." Then in 1986, Sweden's Electrolux gobbled up White Consolidated Industries and added White-Westinghouse to the list of brand names they owned for use in the North American market.

For the full history of WCI, click the link at the bottom of my post.

For some reason, Electrolux decided it was best to place their Eureka vacuum division under the new WCI umbrella. For about 15 years after that, Eureka vacuum cleaners were actually being produced by a company called White Consolidated Industries....probably right up until Electrolux bought back the rights to use their name in North America in 2007. If any of you have old stock Eureka dust bags from the 1990's, look at the copyright at the bottom of the package: it should say WCI, or White Consolidated Industries. I think all the World Vac boxes were labelled with that corporate copyright as well.

The result of this corporate takeover was the sudden appearance of a line of Eureka vacs branded with the name White-Westinghouse. I distinctly remember seeing cool cream- coloured Eureka Bravo uprights labelled White-Westinghouse in a department store in Florida. I think the line also included a WW Mighty Mite as well. This was also the period in Eureka's history that saw the strange appearance of a line of Eureka vacs branded the "Christian Klingour" line or some such Swedish name. They looked similar to the WW vac line, but had a unique "fashion designer" look to them and sported cool cream and hunter green colour combinations. I probably have the designer's name wrong....but it should be close to Christian Klingour....

The later appearance of the old Westinghouse logo on vacs such as the Unplugged Cordless vac has nothing to do with WCI. This is a case of misleading logo identity. Sorry to sound like a grumpy old man, but these days when I see appliances labelled with an old brand logo like GE or Sunbeam or Lewyt or Westinghouse, I know it has nothing to do with the corporate giants of the 1960's. Some small company has most likely bought the rights to use the name and graphic logo to fool the consumer into thinking they are getting the real thing when they are not. Can't stand it when my mom sees a Sunbeam product advertised and exclaims: "oh....Sunbeam is a good name!"

Once we are on the subject...can someone ask Panasonic to revive Sanyo's Transformax Stick Vac?


CLICK HERE TO GO TO eurekaprince's LINK


Post# 288143 , Reply# 20   7/10/2014 at 21:54 (3,549 days old) by fan-of-fans (USA)        

fan-of-fans's profile picture
I mostly saw the White-Westinghouse vacuums and other household appliances and electronics at Kmart. However, I bought a White-Westinghouse revolving brush hand vac at Bud's Outlet (a Walmart outlet store at the time) back in the late 90s. I don't know who made it, it was white with a black cloth bag. There was a rubber cap at the front that gave access to the belt/motor pulley. I should have kept it, probably would have made a good vacuum to clean car mats/carpets. But I never used it so sold it in a yard sale, though it wasn't a bad vacuum.

Those GE labeled Eureka vacuums were sold by Walmart as they had an exclusive right to use the GE name on small appliances until recently. They would relablel items from different manufacturers so they could market a full line of housewares.


Post# 288154 , Reply# 21   7/10/2014 at 23:55 (3,549 days old) by super-sweeper (KSSRC Refurbishment Center)        

super-sweeper's profile picture

Thanks for the cool info, Eurekaprice!



Forum Index:       Other Forums:                      



Comes to the Rescue!

Woops, Time to Check the Bag!!!
Either you need to change your vacuum bag or you forgot to LOG-IN?

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy