Thread Number: 2538
Kirby manual |
[Down to Last] |
Post# 27936 , Reply# 1   12/26/2007 at 17:13 (5,959 days old) by electroluxxxx (……)   |   | |
Checkrate/Likes
 
     
I have one for a G3 pretty much it is the same as a G5 |
Post# 27937 , Reply# 2   12/26/2007 at 17:13 (5,959 days old) by electroluxxxx (……)   |   | |
Checkrate/Likes
 
     
would you want it by any chance |
Post# 27945 , Reply# 5   12/26/2007 at 19:56 (5,959 days old) by decade80 ()   |   | |
Checkrate/Likes
 
     
so if the vacuum is on its back the brushroll moves down?.... |
Post# 27952 , Reply# 7   12/26/2007 at 20:49 (5,959 days old) by electroluxxxx (……)   |   | |
Checkrate/Likes
 
     
I could send it to you in the mail just leave me your address e mail it to me at magvac1004@yahoo.com |
Post# 27953 , Reply# 8   12/26/2007 at 20:52 (5,959 days old) by decade80 ()   |   | |
Checkrate/Likes
 
     
when the rear wheels are on the floor and you turn the vacuum on is the brushroll moving down?.... |
Post# 27955 , Reply# 9   12/26/2007 at 21:09 (5,959 days old) by vintagehoover ()   |   | |
Checkrate/Likes
 
     
...that's right. The brush-roll is going down, or towards the motor unit. That means the belt is on the right way, and everything's running as it should. |
Post# 27956 , Reply# 10   12/26/2007 at 21:14 (5,959 days old) by decade80 ()   |   | |
Checkrate/Likes
 
     
ok...thanks.... |
Post# 27959 , Reply# 11   12/26/2007 at 23:17 (5,959 days old) by decade80 ()   |   | |
Checkrate/Likes
 
     
does a kirby brushroll move down if its on its wheels or is it different?..... |