|
Thread Number: 25087
Another Rexair |
[Down to Last] |  |
| Post# 281959 5/26/2014 at 20:04 (3,619 days old) by BikerRay (Middle Earth) | ||
I walked into Goodwill and found this Model C Rexair for $9.99, but because it's a holiday there was a discount. I paid $8.03 for the unit and asked if there might be more parts to it. The manager said that was all that was with it.
I've already taken it apart, cleaned the fans and replaced the bearings. Also got rid of the hose, I can make up another useing the machine end from this hose. | ||
| Post# 281976 , Reply# 1 5/26/2014 at 22:18 (3,619 days old) by eurekastar (Amarillo, Texas) | ||
 | ||
| Post# 282374 , Reply# 2 5/30/2014 at 17:38 (3,616 days old) by BikerRay (Middle Earth) | ||
|
The bottom plate gasket was almost gone so I chipped out what was left and then used 3/8 in x 3/16 in foam weather strip tape. Isn't it nice how you can use stuff from the hardware store for another application.
Here's a shot of the bottom and also just another shot of the unit. | ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}