|
Thread Number: 20296
Some Updates |
[Down to Last] |  |
| Post# 227332 4/7/2013 at 22:12 (4,029 days old) by thevacuumman (Borger, TX) | ||
|
First, the Hoover Special 825 has had its motor overhauled 
| ||
| Post# 227336 , Reply# 1 4/7/2013 at 22:15 (4,029 days old) by thevacuumman (Borger, TX) | ||
|
Next... The TriStar has been rebuilt and I had put a new badge on it so now it is the "Compact CXL" 
| ||
| Post# 227341 , Reply# 2 4/7/2013 at 22:18 (4,029 days old) by thevacuumman (Borger, TX) | ||
|
And last... The Hoover Encore has been gone through and cleaned up 
| ||
| Post# 227345 , Reply# 3 4/7/2013 at 22:20 (4,029 days old) by HooverCelebrity (Germany) | ||
|
Nice Hoover Encore.. I think that was the last of the last of the Convertibles. I have one of those in storage. :-) | ||
| Post# 227349 , Reply# 4 4/7/2013 at 22:27 (4,029 days old) by thevacuumman (Borger, TX) | ||
|
Hoover Encore I really like it, it was well worth the $2 I paid for it. | ||
| Post# 274546 , Reply# 5 4/2/2014 at 17:52 (3,669 days old) by markanthony5 (England Isle of Wight) | ||
Help i need some advice badly on an 825
Hello there,
I am new to this site thought i would have a look round. I have a Hoover 825,the problem with mine is i am convinced that it needs new bearings top and bottom they sound rough. A friend suggested i oil it,correct me if i am wrong but they are not supposed to be greased. I am thinking my bearings are worn out and my 825 has had a hard hard life,as its covered in knocks and scratches and dents and dings.I am at the moment sanding as much of them out as possible before polishing. I went to my local Hoover repair shop and another their too scared to touch it, and don't know what bearings i should have and what size.Would you know the answer to this. I also need to make a new rubber surround for the headlight area,but not sure how too. I live in the united kingdom by the ways | ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
