Thread Number: 17563
Hoover 150 Bakelite hood restoration
[Down to Last]

Vacuumland's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate vacuumland.org if you make a purchase using any link to eBay on this page]
Post# 189902   7/14/2012 at 18:29 (4,274 days old) by intv1980 (Tucson, Arizona)        

intv1980's profile picture
Hello, My recently saved 150 has been sitting outside of a vacuum shop for 30 years or so, and the hood has been baked to a crisp by the Arizona heat. How can I bring the shine back to the bakelite? Thanks, W.G.

Post# 189912 , Reply# 1   7/14/2012 at 20:59 (4,274 days old) by truckerx (Palm Springs, CA)        
150 hood.....

truckerx's profile picture
Don't think I've ever encountered a severely sun-baked bakelite hood. This could be a one-of-a-kind challenge. A standard recommendation many club members rely on is to try giving it a good rub-down with Brasso. A light sanding with a very fine grit wet sandpaper is another method I've used with success. Normally, Brasso will make bakelite gleam.
Last resort, look for a junk 150 with a good hood. Let us know how you progress.


Post# 190083 , Reply# 2   7/15/2012 at 19:51 (4,273 days old) by athanasius80 (Huntington Beach CA)        

Be very careful with polishing Bakelite. (The antique radio collectors get into fits over this topic.) It is very possible to polish through the hard surface and get into porous substrate that will not polish to a shine. If I were you, I would use a plastic cleaner to get the Bakelite clean, use a plastic polish sparingly, and then use a nice automotive wax. The wax will restore some shine and depth of color to the Bakelite. (Note, some of the plastic collectors hate this and would consider waxing Bakelite heresy, but this piece is already less than pristine so I don't see how this makes it any worse than it already is.)

Good luck!


Post# 190096 , Reply# 3   7/15/2012 at 20:58 (4,273 days old) by truckerx (Palm Springs, CA)        
post some photos......

truckerx's profile picture
I think whatever method you prefer to start with - moderation is the key. You certainly would not want to do more damage. Post some photos, because it's hard to visualize what you're talking about.

Post# 190102 , Reply# 4   7/15/2012 at 21:29 (4,273 days old) by Brandon_W_T ()        

I used brasso on one of my 150 hoods. It came out quite shiny. It doesn't remove scratches. But that can ruin the bakelite sometimes. Ill leave them there. They are not too noticeable from a distance.

I have yet to clean the other hood with brasso yet. Its in much better shape. Should be interesting to see how it turns out.


Post# 190241 , Reply# 5   7/16/2012 at 20:09 (4,272 days old) by truckerx (Palm Springs, CA)        
Oh!...

truckerx's profile picture
Thanks for the photos. I'm glad that Brasso worked out for you. I was surprised; I didn't think the hoods looked that bad for being in the sun for 30 years.


Forum Index:       Other Forums:                      



Comes to the Rescue!

Woops, Time to Check the Bag!!!
Either you need to change your vacuum bag or you forgot to LOG-IN?

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy