Thread Number: 16918
Help w/Hose ID |
[Down to Last] |
Post# 180673 , Reply# 1   5/11/2012 at 19:52 (4,338 days old) by meba2233 (Webster Groves, MO)   |   | |
Checkrate/Likes
 
     
Here is a better look at the machine and wand connections. Thanks again. Mark |
Post# 180674 , Reply# 2   5/11/2012 at 20:15 (4,338 days old) by ge1969 (Jefferson, GA)   |   | |
Checkrate/Likes
 
     
Hey Mark! That hose is for a Eureka upright, but it's missing the curved metal wand end, which would have went over the short end. Later, Trg |
Post# 180675 , Reply# 3   5/11/2012 at 20:18 (4,338 days old) by vacman1961 (North Babylon, New York)   |   | |
Checkrate/Likes
 
     
That hose is from a Eureka upright from the 60's, I am not sure of the model number, but the hose connected to the machine where the now "Dial A Nap" knob is located. The handle end is actually missing off your hose, it should have a conventional Eureka "boom a rang" style handle on it. |
Post# 180676 , Reply# 4   5/11/2012 at 20:36 (4,338 days old) by pr-21 (Middletown, OH)   |   | |
Checkrate/Likes
 
     
|
Post# 180696 , Reply# 5   5/12/2012 at 09:27 (4,337 days old) by rugsucker (Elizabethton TN)   |   | |
Checkrate/Likes
 
     
All the above is correct.In addition there would be a flat rectangular cover that would snap in the brush opening of bottom plate to seal suction. |