|
Thread Number: 8372
Info on Kenmore Upright??? |
[Down to Last] |  |
| Post# 93113 , Reply# 1 3/8/2010 at 13:06 (5,152 days old) by meba2233 (Webster Groves, MO) | ||
|
Plastic Hood Here is a better picture of the hood. An interesting design as there is no on/off switch. The machine starts when you lower the handle. 
| ||
| Post# 93158 , Reply# 2 3/9/2010 at 16:56 (5,151 days old) by appliguy (Oakton Va.) | ||
|
It was made by Singer/Ryobi was it not? PAT COFFEY | ||
| Post# 93174 , Reply# 3 3/9/2010 at 19:35 (5,151 days old) by joe22 () | ||
|
yes its a singer, they also made sunbeam uprights 60-70s | ||
| Post# 93208 , Reply# 4 3/10/2010 at 09:42 (5,150 days old) by kenmore81 (Warwick, RI) | ||
Mark, if you tip the vac forward as if you are changing the belt,There should be a sticker on the bottom left but on the sidewall IIRC. It could be the right neas the Pile hight. If not the the model is 116.xxx1993.Theres a good chance though that the sticker fell off.The 7B11 stamp would be the inspection ID #. That vac is from about 1986-89. It is about the 3rd model up from BOL price wise. It went for around $89.99 or $99.99. Come 1993 Those were discontinued for the Elite look a likes with the bag on the front. Hope this helps. Ken | ||
| Post# 93215 , Reply# 5 3/10/2010 at 11:43 (5,150 days old) by meba2233 (Webster Groves, MO) | ||
|
Thanks Ken.... Hey Ken...thank you, and thanks to everyone else that replied. There is a sticker there but the model number was so faded that I did not see it. I took my flashlight and looked closer and think is says Model 175.3120181. Does that sound right? Seems like a very lightweight vac that works great. Thanks again. Mark | ||
| Post# 93270 , Reply# 7 3/10/2010 at 22:29 (5,150 days old) by kenmore81 (Warwick, RI) | ||
|
| ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
