|
Thread Number: 7379
Kirby 561 |
[Down to Last] |  |
| Post# 81426 9/25/2009 at 23:31 (5,319 days old) by stunnerable () | ||
|
Guys, is the adjustment pedal easy to fix/replace? I may buy a 561 with a good original cord for next to nothing... but the adjustment petal is broken. Any advice?? I'm new by the way. 
| ||
| Post# 81430 , Reply# 1 9/25/2009 at 23:46 (5,319 days old) by kc_kirby (Kansas City, MO) | ||
|
The toe touch adjusters are not hard to replace at all. There are two screws below the axle that hold it in. You just have to find another axle and your set. If that's all that is wrong with it I wouldn't let it stop you from buying it. Hope that helps. And welcome to the site. Chad Cunningham | ||
| Post# 81431 , Reply# 2 9/25/2009 at 23:58 (5,319 days old) by stunnerable () | ||
|
Awesome! That's good news. Thanks. This site is great. I couldn't believe it existed. I thought I was the only one. HA! | ||
| Post# 81442 , Reply# 4 9/26/2009 at 09:05 (5,319 days old) by stunnerable () | ||
|
Mine too Dan! Thanks! | ||
Post# 81449 , Reply# 6 9/26/2009 at 11:24 (5,318 days old) by a007kirbyman  (--->> Originally My Mom <<--- (now Wisconsin)) |
||
Welcome Joe & Kirby 561...
I too would like to welcome you to the forum/club. I tripped over the forum/club so-to-speak, when I was doing some seaches. There are a lot of nice people in the club & a lot of helpful info. I am in agreement with Dan, (thermokid), regarding the fancase needing to be replaced; if the picture is of the one you are interested in. This is a simple procedure. Any questions welcomed. I am somewhat limited on any assistance w/ other brands (don't repair or rebuild others); however, with KIRBYs, if there is any way I may be of help, feel free to contact me (email is in my profile). And again, welcome. Bill | ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
