Thread Number: 4493
a few convertibles for sale. |
[Down to Last] |
Post# 50352   9/2/2008 at 03:19 (5,708 days old) by kirbyvertibles (Independence, KS)   |   | |
Checkrate/Likes
 
     
Hello all, I spent the day digging and found Convertibles that I have decited to part with. This has not been easy for me to part with two of these machines. If they were metal then I would keep them. I just need to clear out stuff. If it's in storage then it's time to do something about it, right? The first set of Convertibles are U4393 with 4.8 amps ( green one) full bumper, no hand grip, slider switch. Orange one U4189 also 4.8 amps with half bumper no headlight and with hand grip, toggle switch. These two are the ones I am having trouble parting with. lol All Convertibles work great. I took them all apart, sericed and cleaned and greased the motors. Repelaced bags,belts and bulbs. I even took the outer bags off and washed them in the sink with the fresh smell of Mr. Clean and frebreeze. All the bearrings are great, cords are great,outer bags are great, all outer condition is great, and the brushrolls are useable but I myself would replace them if I were adding them to my collection. CWP makes great and cheap brushrolls that quiet down the Convertibles. All of the machines take type C bags. |
Post# 50354 , Reply# 1   9/2/2008 at 03:31 (5,708 days old) by kirbyvertibles (Independence, KS)   |   | |
Checkrate/Likes
 
     
The Blue one is a U4401. 4.8 amp, motor, half bumper,hand grip, and slider switch. This one has a slight problem with the height adjustment staying up. The burnt orange one is U4305. 4.3 amps,half bumper, no hand grip, and toggle switch. Please email me with your interest. Reaching through email would be easier as I check that more often and sooner than on here. kirbyman123@hotmail.com I can try to ship anywhere. Again, motors are great, very strong. All the carbon brushes are nice and long, although just some advice on the orange one in picture two if you were to use it as a daily driver then I would get a new set of carbons for it. The ones that are in her are fine but they were the shortest out of all these machines and it shows the most use. |
Post# 50355 , Reply# 2   9/2/2008 at 03:33 (5,708 days old) by kirbyvertibles (Independence, KS)   |   | |
Checkrate/Likes
 
     
|
Post# 50364 , Reply# 3   9/2/2008 at 06:33 (5,708 days old) by evlhoover19 ()   |   | |
Checkrate/Likes
 
     
ill buy them all |
Post# 50462 , Reply# 4   9/3/2008 at 16:35 (5,707 days old) by kirbyvertibles (Independence, KS)   |   | |
Checkrate/Likes
 
     
|
Post# 50510 , Reply# 5   9/3/2008 at 23:04 (5,706 days old) by gottahaveahoove (Pittston, Pennsylvania, 18640)   |   | |
Checkrate/Likes
 
     
|
Post# 50596 , Reply# 6   9/4/2008 at 19:57 (5,705 days old) by kirbyvertibles (Independence, KS)   |   | |
Checkrate/Likes
 
     
|