Thread Number: 35636
/ Tag: 50s/60s/70s Vacuum Cleaners
Electrolux CB |
[Down to Last] |
Post# 382812   12/17/2017 at 20:52 (2,319 days old) by Keither (California )   |   | |
Checkrate/Likes
 
1    
My CB is now fully functional, thanks to finally locating the CB three pin adapter ! I could not have hoped for a better Christmas 🎄 present! ( well almost !)
View Full Size
|
Post# 382820 , Reply# 2   12/17/2017 at 22:28 (2,319 days old) by human (Pines of Carolina)   |   | |
Checkrate/Likes
 
     
That looks like a PN4 to me. The PN2's elbow connector is set almost in the center of the nozzle instead of into an extension out the back. The PN4 also has two wheels on the rear on either side of the elbow assembly and two cylindrical rollers underneath instead of four rollers underneath as the PN2 has.
|
Post# 382822 , Reply# 3   12/17/2017 at 22:31 (2,319 days old) by Keither (California )   |   | |
Checkrate/Likes
 
     
Hi Paul !! It’s actually a PN4 😊 Im using the adapter cord no. 42112 as a retrofit to use the PN4 and three pin cord assembly. Thanks so much for the info Paul! I hope your doing well!
View Full Size
|
Post# 382827 , Reply# 4   12/17/2017 at 23:00 (2,319 days old) by Paul (USA)   |   | |
Checkrate/Likes
 
     
You're welcome, Keith! I'm doing well, thanks. Hope you are, too. Happy Electroluxing with your spiffy CB and PN-4! |
Post# 382829 , Reply# 5   12/17/2017 at 23:06 (2,319 days old) by Paul (USA)   |   | |
Checkrate/Likes
 
     
Keith, Another question ... does your CB have the "positive latching alignment system" (see reply 1)? Edgar, Good eye. I'd missed that detail about the different elbow positions between the PN-2 and PN-4. |
Post# 382831 , Reply# 6   12/17/2017 at 23:20 (2,319 days old) by Keither (California )   |   | |
Checkrate/Likes
 
     
|