Thread Number: 35369  /  Tag: Wanted to Buy Items
Wanted: 10 Amp Fantom Fury
[Down to Last]

Vacuumland's exclusive eBay Watch:
scroll >>> for more items
Post# 380439   10/30/2017 at 15:31 by niclonnic (Bonney Lake, WA)        

niclonnic's profile picture
I have been searching for a Fantom Fury for quite a long time now, specifically the 10 amp version, with the dark green collection bin, teal bumper and teal handle grip.

Here's the story: Sometime in the mid- to late '90s (not sure what the exact date was), my dad ordered this vacuum from an infomercial. It was our first bagless vacuum. At the time, we were living in a 2-bedroom apartment with dark brown carpeting. The Fantom was amazing! It pulled out tons of dirt and cat hair from the carpet.

The Fantom Fury remained in use until the summer of 2001, when we moved to our current home. Apparently, the cord became damaged and the vacuum became unusable. So we probably threw out the entire machine. I never saw it again.

Anyway, I'm looking for a 10 amp Fantom Fury in fully working condition. No broken parts and must have all the attachments. I'm willing to pay for shipping.

Please let me know!

Post# 380444 , Reply# 1   10/30/2017 at 17:49 by NickTechTalk (New Jersey)        
If you can't find a working one...

I do have one with a bad motor. Figured I would just throw that out there in case you decide you want a fixer-upper :)

Post# 380447 , Reply# 2   10/30/2017 at 20:45 by niclonnic (Bonney Lake, WA)        
No thanks

niclonnic's profile picture
I've never done electrical repairs to a vacuum cleaner.

Post# 380475 , Reply# 3   10/31/2017 at 10:22 by FantomTechGuy (US)        
I'll look out

fantomtechguy's profile picture
If you want me to, I can look for one. Then I can refurb it for you. It will cost $100 to refurb it from the ground up. Let me know if you are up for it.

Post# 380477 , Reply# 4   10/31/2017 at 14:03 by niclonnic (Bonney Lake, WA)        
Yes please!

niclonnic's profile picture
I would definitely be interested in a refurbished 10 amp Fantom Fury. How much would shipping cost?

Post# 380493 , Reply# 5   10/31/2017 at 20:36 by FantomTechGuy (US)        

fantomtechguy's profile picture
I sell refurbished Fantoms starting out at $100
Thunder/original $120- Fury $100- Cyclone XT $110- Lightning $100- Wildcat $120
Here is what I do to all models:
-Deep clean
-Polish (Waxing and repairing: takes about 6 hours)
-Preform Motor tests
-Repair motor if need be
-Clean motor
-Replace Belt, Filter, brush roll, attachments
As for the shipping
The shipping fee is $50, shipping weight kills the price
I also can strip down the Fantom to fit in a smaller box
(That will require you to reassemble it when it arrives)
If you go that route, the shipping fee may be less, so you would get a quote when I get the shipping info.

I also take Fantoms to refurb also. If you own a Fantom that you want refurbed, then you can send it to me for the refurb.

The price will depend on what model you want refurbed
And you need to cover shipping

Hope I helped out!

Post# 380534 , Reply# 6   11/1/2017 at 15:09 by niclonnic (Bonney Lake, WA)        

niclonnic's profile picture
That's quite a rigorous refurbishment process!

I'd like the Fantom to fit in a smaller box. I won't mind reassembling it when it arrives. What would shipping cost for that method?

Post# 380544 , Reply# 7   11/1/2017 at 17:18 by FantomTechGuy (US)        

fantomtechguy's profile picture
Well, to be honest it depends on two things
1. How much you want me to strip it down
2. Which mail carrier you want me to choose

I let my customers choose what mail carrier they want (USPS, UPS, FEDEX, ETC)
And I also let them choose how broken down they want the Fantom.
If they choose this route, I tear it down and balance out the box
Then number each piece to tell you which one to take out first.

The price will vary, but it can be up to $40 less then fully assembled.
To add, the only model I don't tear down is the Lightning, for obvious reasons.

Post# 380581 , Reply# 8   11/2/2017 at 15:45 by niclonnic (Bonney Lake, WA)        

niclonnic's profile picture
1. I would just want the handle/wand and hose removed.
2. I would like to use FedEx for shipping. Apparently, they have very reasonable prices.

Post# 381005 , Reply# 9   11/9/2017 at 14:43 by niclonnic (Bonney Lake, WA)        

niclonnic's profile picture
Just a reminder to let you know that I'm still interested in a 10 amp Fantom Fury.

Post# 381013 , Reply# 10   11/9/2017 at 18:52 by FantomTechGuy (US)        

fantomtechguy's profile picture
Ok, I will put you down on my list.
Green 10amp Fury with the refurb?

Post# 381027 , Reply# 11   11/9/2017 at 22:39 by niclonnic (Bonney Lake, WA)        
Sounds good!

niclonnic's profile picture
I need to get some money together.

Post# 381046 , Reply# 12   11/10/2017 at 09:57 by kirbyvertibles (Independence, KS)        

kirbyvertibles's profile picture
You wouldn't happen to have any refurbed XT's would you? I'd like to find one of those. Had many over the years but sold them. Wish I had kept one. The last one I had was a cinnamon color.

Post# 381054 , Reply# 13   11/10/2017 at 12:10 by FantomTechGuy (US)        

fantomtechguy's profile picture
I currently don't have a Cyclone XT for sale. But if you want me to I can put you on my list for a refurbed one. The price is $110 +shipping with everything refurbed on it. And you can choose how you want it shipped to minimize the shipping cost.

Post# 381394 , Reply# 14   11/15/2017 at 19:06 by niclonnic (Bonney Lake, WA)        

niclonnic's profile picture
Any news on the Fantom Fury lately?

Post# 381470 , Reply# 15   11/17/2017 at 08:47 by kirbyvertibles (Independence, KS)        

kirbyvertibles's profile picture
I will let you know, I have a few other things going on at the moment but I do want an XT

Post# 381501 , Reply# 16   11/17/2017 at 20:43 by FantomTechGuy (US)        

fantomtechguy's profile picture
Not yet, but I will keep you posted

Post# 385329 , Reply# 17   2/3/2018 at 14:18 by niclonnic (Bonney Lake, WA)        

niclonnic's profile picture
I haven't heard from you in a while. Is my Fantom Fury ready yet? Because I have the money to pay for it.

Post# 385471 , Reply# 18   2/5/2018 at 15:05 by niclonnic (Bonney Lake, WA)        

niclonnic's profile picture
If it's ready, how am I going to pay for it?

Post# 385511 , Reply# 19   2/6/2018 at 01:57 by FantomTechGuy (US)        

fantomtechguy's profile picture
Sorry, but I have not come across a Fury yet. I am still looking for you though. Once I find one, I will let you know. Sorry for the wait.

Post# 385528 , Reply# 20   2/6/2018 at 14:53 by niclonnic (Bonney Lake, WA)        
It's okay

niclonnic's profile picture
I don't mind waiting longer for a Fury. It looks like 10 amp Furies are hard to find in your area.

Forum Index:       Other Forums:                      

Comes to the Rescue!

Woops, Time to Check the Bag!!!
Either you need to change your vacuum bag or you forgot to LOG-IN?

Discuss-O-MAT Log-In

New Members
Click Here To Sign Up.


Vacuumland home
Discuss-o-Vac Forums
Vintage Brochures, Service and Owners Manuals
Today's Vacuum of the Day
Photos of our Collections
Vintage Vacuum Cleaner to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy