|
Thread Number: 34722
/ Tag: Recent Vacuum Cleaners from past 20 years
Featherlite Help Needed! |
[Down to Last] |  |
| Post# 374961 7/6/2017 at 13:36 (2,475 days old) by funnynet1231 (Maine) | ||
Hello. I bought a replacement fan for my featherlite plus but I can't figure out how to put it on! I wish the featherlites were like the elites were you can just pop off the hood and configure the motor and have access to the fan. Please help!
Cam | ||
| Post# 376489 , Reply# 1 8/6/2017 at 18:02 (2,444 days old) by carolinaguy1996 (Candler, NC) | ||
|
You're right, the Elites are easier to replace parts on. | ||
| Post# 376971 , Reply# 2 8/17/2017 at 21:40 (2,433 days old) by Dustin (Jackson, MI) | ||
Those are so simple, very similar to an elite for opening up. There is 4 clips/tabs on the corners of the hood, one at each corner. I believe the front ones are at the sides of the brushroll housing, the back ones behind the wheels. The hood should then pop off. There is either 2 or 4 screws holding the motor housing to the base and I believe 4 on the fan case itself.
| ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
;){kind=link}
;){kind=link}