Thread Number: 34698  /  Tag: 50s/60s/70s Vacuum Cleaners
My Kirby collection
[Down to Last]

Vacuumland's exclusive eBay Watch:
scroll >>> for more items
Post# 374778   7/1/2017 at 16:28 by toastermike (Milwaukie Oregon)        

toastermike's profile picture
I displayed my entire Royal collection a while back and thought I would do the same with my entire (and much smaller) Kirby collection. Left to right: 509, 560, Dual Sanitronic 80, Classic III, Legend II and matching Vacuette. The 509 and DS 80 are fully restored, and the others are in their beautiful original condition. The DS 80, Classic III, and Legend II are all complete with all of the accessories. Not shown is a 512 that I am going to restore and customize in black because that model and myself were both built in 1952.

  Photos...       <              >      Photo 1 of 3         View Full Size

Post# 374781 , Reply# 1   7/1/2017 at 18:30 by kirbyvacuum (Long Island New York)        

your Kirbys

Post# 374790 , Reply# 2   7/2/2017 at 01:25 by kirbyds80 (California)        

Wow, nice little collection.

Post# 374816 , Reply# 3   7/2/2017 at 19:12 by broomvac (N/A)        
Legend II Nozzle

broomvac's profile picture
Toastermike, I must commend your Kirby collection. A good selection of machines, all in top condition. I particularly like the 509 and the 560. I'd love to get my hands on some more of the older Kirbys like those again.

I must admit, I have never seen one of those large nozzles in a Legend II. However, I have seen them on the Heritage II/Legend. Is that nozzle original or is it a Heritage/Heritage II nozzle dressed up in Legend II trim?

Incidentally, I just acquired the Craftsman cousin to your Vacuette and am in the process of cleaning it up right now.


Post# 375088 , Reply# 4   7/9/2017 at 23:18 by kirbyklekter (Concord,Ca.)        
1952 was a good year

I know, I too was born that year. Will be 65 in two weeks. Now I will be looking for a 512 to refurbish too! I was told that to determine the model year in the 500 series that you just drop the middle digit, so 501=1951 etc. Can you tell me what year a 562 model is? Was that just for the 1950-1959 era? Very nice collection Mike. I'm a new member but a long time guest, thanks Billy Clyde aka,kirbyklekter

Post# 375092 , Reply# 5   7/10/2017 at 00:01 by KirbyClassicIII (Milwaukie, Oregon)        

kirbyclassiciii's profile picture

I am soon to be the owner of a 1987 Heritage II with a shake-out bag!


  View Full Size
Post# 375109 , Reply# 6   7/10/2017 at 09:59 by kloveland (Tulsa, OK)        
Very nice!

kloveland's profile picture
I like the Kirby Legend and the Classic III.

Post# 375143 , Reply# 7   7/11/2017 at 03:19 by toastermike (Milwaukie Oregon)        
Legend II Nozzle

toastermike's profile picture
Broomvac, this is the original nozzle. I often find Legend II's, all with large nozzles. I would like to find a small one for it someday. My understanding is the small nozzle was an option and was an old 500 series nozzle with the newer belt lifter and bumper fitted. Maybe I could make my own with spare parts!


Post# 375144 , Reply# 8   7/11/2017 at 03:23 by toastermike (Milwaukie Oregon)        

toastermike's profile picture
Billy, the 562 was the 1962 model.

Post# 375145 , Reply# 9   7/11/2017 at 03:25 by toastermike (Milwaukie Oregon)        
shake out bag

toastermike's profile picture
Congratulations Ben, those shake out bags seem to be hard to find!

Post# 375183 , Reply# 10   7/11/2017 at 20:54 by KirbyClassicIII (Milwaukie, Oregon)        

kirbyclassiciii's profile picture

What an early Heritage II nozzle looked like (1984-1985 - 1st picture), and what a small nozzle from the same machine had looked like (2nd picture)... as you can see, the only casting change made to the small HII head from the Sanitronic 562 version, aside from the blanked-out space where the suction relief vent would be (covered up by the belt lifter instruction decal, but if you look inside the casting you can still make out the indentations for the vent), was the additional nodule to support the speed switch for the Heritage/Legend series, although the small nozzle casting for the Heritage I/84 (and some early HII small heads--mine not one of them, of course) also had another additional nodule to support the speed switch for the Classic Omega/III/Tradition.



  Photos...       <              >      Photo 1 of 2         View Full Size

This post was last edited 07/11/2017 at 21:09
Post# 375202 , Reply# 11   7/12/2017 at 03:02 by kirbyklekter (Concord,Ca.)        

Thank you for the heads up on the 562! Billy

Post# 375205 , Reply# 12   7/12/2017 at 07:30 by gsheen (Cape Town South Africa)        

gsheen's profile picture
Mike I Love the kirbys They looks awesome.

On the large Heritage II large nozzle does anyone know if these were fitted to export units.

I have a few Heritage ii,s and most are 84 to 85 models according to the stamps underneath, I also have a vacuum shop and we specialize in Kirby's. Never seen one of these older style nozzles

Forum Index:       Other Forums:                      

Comes to the Rescue!

Woops, Time to Check the Bag!!!
Either you need to change your vacuum bag or you forgot to LOG-IN?

Discuss-O-MAT Log-In

New Members
Click Here To Sign Up.


Vacuumland home
Discuss-o-Vac Forums
Vintage Brochures, Service and Owners Manuals
Today's Vacuum of the Day
Photos of our Collections
Vintage Vacuum Cleaner to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy