Thread Number: 34688  /  Tag: 50s/60s/70s Vacuum Cleaners
1970 Hoover Junior Dirtsearcher 1354A - Restoration
[Down to Last]

Vacuumland's exclusive eBay Watch:
scroll >>> for more items
Post# 374673   6/29/2017 at 18:15 by AlexHoovers94 (Manchester UK)        

alexhoovers94's profile picture
Hello all, Alex here again, not posted here in a while, however I have a new vacuum to show you.

Earlier this week I got a Hoover Dirtsearcher off ebay, cost 35 deliveried, which wasn't a bad price, considering it is in very good condition.

Here are some before restoration photos.

Post# 374674 , Reply# 1   6/29/2017 at 18:15 by AlexHoovers94 (Manchester UK)        

alexhoovers94's profile picture

Post# 374675 , Reply# 2   6/29/2017 at 18:16 by AlexHoovers94 (Manchester UK)        

alexhoovers94's profile picture

Post# 374676 , Reply# 3   6/29/2017 at 18:17 by AlexHoovers94 (Manchester UK)        

alexhoovers94's profile picture

Post# 374677 , Reply# 4   6/29/2017 at 18:18 by AlexHoovers94 (Manchester UK)        

alexhoovers94's profile picture

Post# 374678 , Reply# 5   6/29/2017 at 18:18 by AlexHoovers94 (Manchester UK)        

alexhoovers94's profile picture

Post# 374680 , Reply# 6   6/29/2017 at 18:19 by AlexHoovers94 (Manchester UK)        

alexhoovers94's profile picture

Post# 374681 , Reply# 7   6/29/2017 at 18:20 by AlexHoovers94 (Manchester UK)        
Not too dirty under the cover...Seen worse!

alexhoovers94's profile picture

Post# 374682 , Reply# 8   6/29/2017 at 18:21 by AlexHoovers94 (Manchester UK)        
Full motor service.

alexhoovers94's profile picture

Post# 374683 , Reply# 9   6/29/2017 at 18:24 by AlexHoovers94 (Manchester UK)        
Motor all cleaned and back together but...

alexhoovers94's profile picture
Had to replace the front bearing with a new one...It was a bit worn.

Post# 374684 , Reply# 10   6/29/2017 at 18:26 by AlexHoovers94 (Manchester UK)        
Sanded down the brushroll, ready for a respray...

alexhoovers94's profile picture
I like to get my hands dirty! 😉

Post# 374685 , Reply# 11   6/29/2017 at 18:27 by AlexHoovers94 (Manchester UK)        
Much better!

alexhoovers94's profile picture

Post# 374686 , Reply# 12   6/29/2017 at 18:32 by AlexHoovers94 (Manchester UK)        
All parts washed...

alexhoovers94's profile picture
The bumper as well as the rubberised lower and upper cord support are missing off this photo, they were drying on another towel! Lol.

Post# 374687 , Reply# 13   6/29/2017 at 18:33 by AlexHoovers94 (Manchester UK)        
Bag washed and drying.

alexhoovers94's profile picture

Post# 374688 , Reply# 14   6/29/2017 at 18:35 by AlexHoovers94 (Manchester UK)        
Time to put everything back together! Lovely and clean now!

alexhoovers94's profile picture

Post# 374689 , Reply# 15   6/29/2017 at 18:37 by AlexHoovers94 (Manchester UK)        

alexhoovers94's profile picture

After a few days work, here is the end result, I am really pleased with it. Successful restoration! 😀

Post# 374690 , Reply# 16   6/29/2017 at 18:38 by AlexHoovers94 (Manchester UK)        

alexhoovers94's profile picture

Post# 374691 , Reply# 17   6/29/2017 at 18:45 by AlexHoovers94 (Manchester UK)        
360 swivelling upper cord hook...

alexhoovers94's profile picture

It was a deluxe feature on the Dirtsearcher...It was a fixed metal hook, on the standard Junior. The rotating cord hook on the Dirtsearcher was more convenient, all be it, not as sturdy, since it was plastic and not metal...Miraculously, mine isn't cracked or broken!

Needless to say, the lower cord hook, both on the Dirtsearcher and standard Junior is a fixed metal hook.

Post# 374692 , Reply# 18   6/29/2017 at 18:46 by AlexHoovers94 (Manchester UK)        

alexhoovers94's profile picture

Post# 374693 , Reply# 19   6/29/2017 at 18:46 by AlexHoovers94 (Manchester UK)        

alexhoovers94's profile picture

Post# 374694 , Reply# 20   6/29/2017 at 18:50 by AlexHoovers94 (Manchester UK)        
Of course, the stamped metal Hoover medallion!

alexhoovers94's profile picture

Post# 374695 , Reply# 21   6/29/2017 at 18:51 by AlexHoovers94 (Manchester UK)        
The four position "Height Right Control"

alexhoovers94's profile picture

Post# 374696 , Reply# 22   6/29/2017 at 18:54 by AlexHoovers94 (Manchester UK)        
That is how the headlight connects if you were wondering...

alexhoovers94's profile picture
Also, a view of the fan chamber and reverse side of the front cover plate...This plate was removed for the installation of a new belt or for attaching the cleaning tools.

Post# 374698 , Reply# 23   6/29/2017 at 18:58 by AlexHoovers94 (Manchester UK)        
Rating sticker...

alexhoovers94's profile picture

As you can see, the Junior Dirtsearcher was rather enegry efficient at only 275w!

It can also be dated from this rating label, this Junior was manufactured in July 1970!

Post# 374699 , Reply# 24   6/29/2017 at 18:59 by AlexHoovers94 (Manchester UK)        
The rear of the machine...

alexhoovers94's profile picture

Post# 374700 , Reply# 25   6/29/2017 at 18:59 by AlexHoovers94 (Manchester UK)        

alexhoovers94's profile picture

Post# 374701 , Reply# 26   6/29/2017 at 19:00 by AlexHoovers94 (Manchester UK)        

alexhoovers94's profile picture

Post# 374702 , Reply# 27   6/29/2017 at 19:01 by AlexHoovers94 (Manchester UK)        

alexhoovers94's profile picture

Post# 374703 , Reply# 28   6/29/2017 at 19:10 by AlexHoovers94 (Manchester UK)        
Genuine Hoover bag! Of course!

alexhoovers94's profile picture

The outer, vinyl bag unzips and can be released from the top bag support, to give you full access, in order to replace the inner, disposable paper bag.

Post# 374704 , Reply# 29   6/29/2017 at 19:15 by AlexHoovers94 (Manchester UK)        
It Beats...As It Sweeps...As It Cleans

alexhoovers94's profile picture

"Years of experience prove, the more carpets you have, the more you need Hoover!"

Post# 374705 , Reply# 30   6/29/2017 at 19:16 by AlexHoovers94 (Manchester UK)        
Cleaning tools...

alexhoovers94's profile picture

Post# 374706 , Reply# 31   6/29/2017 at 19:19 by AlexHoovers94 (Manchester UK)        
I couldn't leave you, without showing the money shot!

alexhoovers94's profile picture

"When it goes searching for dirt, it finds it!"

Post# 374707 , Reply# 32   6/29/2017 at 19:21 by AlexHoovers94 (Manchester UK)        
Thanks for scrolling!

alexhoovers94's profile picture

Hope you enjoyed reading this thread and I hope you are all doing well.



Post# 374708 , Reply# 33   6/29/2017 at 19:23 by vacuumlover (Chaddesden, Derby, UK)        

vacuumlover's profile picture
Nice find. You did a good job 👍

Post# 374709 , Reply# 34   6/29/2017 at 19:29 by AlexHoovers94 (Manchester UK)        

alexhoovers94's profile picture

Thanks Emma.

Post# 374890 , Reply# 35   7/4/2017 at 16:22 by chueewowee (Middlesex)        
front bearing

Lovely job - and well tackled.

I need to replace - or lubricate my front bearing too, and replace the fan blades which are a bit tattered. The Motor is out, but before I use any force, I would like to check , how is the fan and belt pulley removed from the armature prior to removing the bearing (or, how are they attached)?

Post# 374898 , Reply# 36   7/4/2017 at 18:19 by AlexHoovers94 (Manchester UK)        

alexhoovers94's profile picture

If you disassemble the motor completely and take the armature out, along with the front bearing, fan and pully, you can hold the armature in one hand and the fan in the other and if you hold the armature tight and then twist the fan one way or the other, it will loosen and the pully will unscrew...You can then pull the fan off the shaft and remove the spacers, then, gradually tap off the front bearing from its shaft (being careful not to bend the cooling fan) and that's it. 😊


Post# 374899 , Reply# 37   7/4/2017 at 18:19 by chueewowee (Middlesex)        

OK, I discovered the trick:the pulley is on a reverses thread - rotate clockwise to undo the pulley, then fan and bearing slide off the armature.

Post# 374903 , Reply# 38   7/4/2017 at 21:31 by electricbroom (Sunshine State USA)        

electricbroom's profile picture

Another great find and restoration by you, love the white and blue color, always liked that combination. Wish we had those in the states.

Post# 374912 , Reply# 39   7/5/2017 at 05:19 by AlexHoovers94 (Manchester UK)        

alexhoovers94's profile picture

Thanks so much.

I love restoring them to looking as near to new as possible.

I love the white and blue colour scheme too, wish i had the matching Senior.

Post# 374927 , Reply# 40   7/5/2017 at 16:40 by portable (Tucson, AZ)        

portable's profile picture

Wow, Alex. It turned out beautifully. You did a great job.

A question: how did you restore the vacuum's bumper (furniture guard)?

Post# 374932 , Reply# 41   7/5/2017 at 18:21 by AlexHoovers94 (Manchester UK)        

alexhoovers94's profile picture

Thanks so much, I am really pleased with the results, can be quite tedious.

A trick to restoring the bumper is to get a couple of dishwasher tablets in a small bucket of water, perhaps the amount an average kitchen or bathroom sink holds, the less diluted the better.

Soak the ruber parts in that solution and after soaking for around an hour, the grime just wipes off! Very little effort required, when it is dry, just polish with some pledge.


Post# 374980 , Reply# 42   7/7/2017 at 10:04 by vacerator (Macomb Michigan)        
Yes, all the above,

and hope all is well in Manc's Alex.
Dirty can be a bit of fun at times. o!o (Otter guy)
Like Lisa Stansfield sings, people hold on, got to be strong.

Ever watched the 100 foot journey? Excellent film.

Post# 374985 , Reply# 43   7/7/2017 at 10:50 by gottahaveahoove (Pittston, Pennsylvania, 18640)        

gottahaveahoove's profile picture
EXCELLENT job there.
A "Dirtsearcher" is on my "Must have list".
Some day........................

Post# 374992 , Reply# 44   7/7/2017 at 17:54 by luxlife (Under a Pecan Tree)        

What is the small blue plastic piece beneath the ratings sticker?

Post# 375022 , Reply# 45   7/8/2017 at 14:36 by rugsucker (Elizabethton TN)        
"blue plastic piece ?"

That would be the electric connection to headlight(not used in US).

Post# 375083 , Reply# 46   7/9/2017 at 20:21 by AlexHoovers94 (Manchester UK)        

alexhoovers94's profile picture

vacerator - Dirty is lots of fun! 😝 Yeh all good thanks, what about you?

Jon - Thank you so much. 😊😊

Post# 375119 , Reply# 47   7/10/2017 at 13:23 by vacerator (Macomb Michigan)        
Great here too Alex! Thanks!

Been buisy with summer gardening and such. Our second grand child was born the end of March, so we see them a lot too. My step daughters babies of course.
I always liked kids, but obviously, my persuasion is for the more masculine gender

I live about 45 minutes +- from Dearborn, Michigan. We have not had problems as you have there, at least not yet. The first immigrants from the middle east were mainly Catholics from Lebanon, and a few from Yemen going back over 60 years.
The people I have met are very polite, and we have in our city, a large Chaldean community, so we have a melting pot of people who had to flee from Iraq. Some have been here 30 years or more already.
I pray for the future of humanity each day. Suppose I had been born there?

Forum Index:       Other Forums:                      

Comes to the Rescue!

Woops, Time to Check the Bag!!!
Either you need to change your vacuum bag or you forgot to LOG-IN?

Discuss-O-MAT Log-In

New Members
Click Here To Sign Up.


Vacuumland home
Discuss-o-Vac Forums
Vintage Brochures, Service and Owners Manuals
Today's Vacuum of the Day
Photos of our Collections
Vintage Vacuum Cleaner to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy