Thread Number: 33918
/ Tag: Wanted to Buy Items
Royal metal upright parts |
[Down to Last] |
Post# 368013 , Reply# 1   3/7/2017 at 18:23 (2,604 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
Colby,
Luckily you can still get certain replacement parts for these machines.
1-259319-000 is your replacement top cord hook (it replaced 1-259318-000). Other hardware to go with it would be 1-003884-000 for the spring, 1-597743-000 as your top cord hook mounting screw, and 1-884708-000 as the top cord hook stud.
1-672270-000 is your replacement rug plate (if the brush roll in it has hex ends), otherwise you'll need to look for discontinued part number 1-285270-000 which was used on nozzles whose brush rolls have square ends.
Good luck finding what you need!
The type of oil to use is medium-weight SAE 30. Never use lightweight or sewing machine oil. Royal recommends you oil the rear bearing approximately once a year for general household use; but if used more often, then oil the bearing more frequently. When oiling, apply three or four drops, and take care to ensure that the oil enters the tube and does not overflow down the edge of the tube.
~Ben |
Post# 368080 , Reply# 2   3/8/2017 at 17:46 (2,603 days old) by Ctvacman (CT)   |   | |
Checkrate/Likes
 
     
Thanks so much for all that info Colby |
Post# 368088 , Reply# 3   3/8/2017 at 18:44 (2,602 days old) by Ctvacman (CT)   |   | |
Checkrate/Likes
 
     
What's the best site to look for these parts? |
Post# 368108 , Reply# 4   3/8/2017 at 23:47 (2,602 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
Colby,
Try eBay, for one. Also try www.vacpartsplusstore.com/... Otherwise, you can call the folks at Royal at 1-800-321-1134, and give them the exact part numbers I'd just mentioned. ~Ben |
Post# 368158 , Reply# 5   3/9/2017 at 15:36 (2,602 days old) by Ctvacman (CT)   |   | |
Checkrate/Likes
 
1    
Ben, Thanks so much I placed my order with vac parts plus, what a cool site, can't believe I've never heard of it before. No luck on eBay with anything, not even a bottom plate. Colby |
Post# 368171 , Reply# 6   3/9/2017 at 17:46 (2,602 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
|