|
Thread Number: 32471
/ Tag: 80s/90s Vacuum Cleaners
The Kirbmonster is sick. |
[Down to Last] |  |
| Post# 356506 , Reply# 1 7/23/2016 at 15:49 (2,831 days old) by human (Pines of Carolina) | ||
New or used? | ||
| Post# 356509 , Reply# 2 7/23/2016 at 18:01 (2,831 days old) by cuffs054 (monticello, ga) | ||
|
human, I will take a look. I am not the handiest person. I would rather pay more so when I screw it up I'll have a number to call! | ||
| Post# 356512 , Reply# 3 7/23/2016 at 20:50 (2,831 days old) by human (Pines of Carolina) | ||
|
Here's the procedure you need to replace a Tech Drive. It's really not very hard. All you need is some basic screwdriver skills and a little patience.
CLICK HERE TO GO TO human's LINK | ||
| Post# 356513 , Reply# 4 7/23/2016 at 20:54 (2,831 days old) by cuffs054 (monticello, ga) | ||
|
human, thanks for the help but the link brings up a bar b que! Are you hinting that I should burn it!? | ||
| Post# 356525 , Reply# 5 7/24/2016 at 07:49 (2,830 days old) by human (Pines of Carolina) | ||
|
| ||
| Post# 356527 , Reply# 6 7/24/2016 at 15:28 (2,830 days old) by sptyks (Skowhegan, Maine) | ||
Kirby G7 Tech Drive Tom,
I can highly recommend The Kirby Needs Store. I have ordered parts from them several times now without any problems. The store is owned and operated by Kent Oyler and should there be a problem, you can reach him at 801-710-2612. All orders arrive in about a week or less.
Here is a direct link to the store page you need:
http://stores.ebay.com/Kirby-Needs/_i.ht...
Here is a link to the correct for the Ultimate G:
http://www.ebay.com/itm/Kirby-G7-Vacuum-...
| ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
