|
Thread Number: 32389
/ Tag: 50s/60s/70s Vacuum Cleaners
Help identify vacuum models these fan blades will fit? |
[Down to Last] |  |
| Post# 355896 7/11/2016 at 20:48 (2,835 days old) by chicagomike (Plover, WI) | ||
Can anyone, please help me identify the vacuum brand/models these fan blades will fit? Thank you in advance of your reply.
#1 - Regina?? | ||
| Post# 355897 , Reply# 1 7/11/2016 at 20:49 (2,835 days old) by chicagomike (Plover, WI) | ||
|
#2
| ||
| Post# 355898 , Reply# 2 7/11/2016 at 20:50 (2,835 days old) by chicagomike (Plover, WI) | ||
|
#3
| ||
| Post# 355899 , Reply# 3 7/11/2016 at 20:51 (2,835 days old) by chicagomike (Plover, WI) | ||
|
#4
#4 the blades protrude past the edge of the casting - and I mention Apex as I thought Apex blades went past the edges of the casting..??
| ||
| Post# 355900 , Reply# 4 7/11/2016 at 20:53 (2,835 days old) by chicagomike (Plover, WI) | ||
|
#5
This is a small diameter fan blade.
If anyone has literature showing fan blades by pictures and part numbers, I would be happy to look them up if you share the literature with me. | ||
| Post# 355931 , Reply# 5 7/12/2016 at 12:14 (2,835 days old) by rugsucker (Elizabethton TN) | ||
|
The only thing I could tell you on these-- --would be the same as the elderly cleaning lady at a local college told one of the young college girls when asked how old you had to be to stop thinking about men.Her reply--"You will have to ask someone older than me." | ||
| Post# 355934 , Reply# 6 7/12/2016 at 13:13 (2,835 days old) by chicagomike (Plover, WI) | ||
|
"You will have to ask someone older than me." | ||
| Forum Index: | 
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}