Thread Number: 32155  /  Tag: 50s/60s/70s Vacuum Cleaners
Air-Way Sanitizor Model 77 Wands...
[Down to Last]

Vacuumland's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate vacuumland.org if you make a purchase using any link to eBay on this page]
Post# 353848   6/15/2016 at 11:50 (2,843 days old) by airway77 (NC)        

Hi All....

Long time guest here; finally decided to join based on my recent turn of events concerning a vacuum...

I just purchased an Air-Way Model 77 off of eBay which runs like a top. Years of research leads me to believe that the tools are all original (they are all Air-Way branded/design), however, the lower wand simply refuses to fit into the floor tools. I've tried everything except destructive force to make it fit and it simply won't budge.

I read somewhere that the original Sanitizor (Model 55) had a different wand fitting. Is it possible I could have received those wands instead of the proper ones?? The locking ring is literally "too big" to fit inside the opening of the attachments.

The machine runs GREAT, and I have no complaints whatsoever with it. I have been raised a loyal Aerus-Electrolux owner and I must say that I would put the Sanitizor head-to-head against my grandmother's prized Lux Marquis any day in the straight-suction department.

Any help is gladly appreciated!


Post# 353849 , Reply# 1   6/15/2016 at 12:32 (2,843 days old) by Dysonman1 (the county)        

dysonman1's profile picture
Would you please take a picture of the lower wand, specifically the flange. Also please take a picture of the upside down rug tool, showing the latch.

Post# 353850 , Reply# 2   6/15/2016 at 13:43 (2,843 days old) by airway77 (NC)        
Air-Way Sanitizor 77 Wands...

Here they are.

Hope this helps!


Post# 353851 , Reply# 3   6/15/2016 at 14:16 (2,843 days old) by electrolux137 (Los Angeles)        

electrolux137's profile picture

~
~

Hmmm.... Are these wands invisible?! hahaha laughing


Post# 353852 , Reply# 4   6/15/2016 at 14:17 (2,843 days old) by airway77 (NC)        
Air-Way Sanitizor 77 Wands...

Way to go my wonderfully stupid PC.....

Here they are for real


  Photos...       <              >      Photo 1 of 5         View Full Size
Post# 353876 , Reply# 5   6/15/2016 at 20:45 (2,843 days old) by Dysonman1 (the county)        

dysonman1's profile picture
This is what it should look like.

  Photos...       <              >      Photo 1 of 3         View Full Size
Post# 353878 , Reply# 6   6/15/2016 at 21:15 (2,843 days old) by airway77 (NC)        
Air-Way Sanitizor 77 Wands...

That is DEFINITELY not what it looks like.

Crap.......just my luck.

Do any of you know where I can find the proper lower wand??? I called three semi-local major vac shops only to learn (while being laughed at by one) that they don't even stock bojack bags, let alone anything else. I need the lower wand to use it in it's "proper" form; I'm using a metal Eureka lower wand and a $12.99 vac-shop special carpet tool (which isn't the greatest) and I really would like to use the proper Air-Way floor tools with it.

As for electrolux137, I hope Samantha and Endora can keep Mrs. Gladys Kravitz occupied so she won't be peeking in my window at my Air-Way :).

If anyone has a lead on said wand...please let me know here in the thread!

Thanks!


Post# 353879 , Reply# 7   6/15/2016 at 21:23 (2,843 days old) by vacuumlad1650 (Wauponsee, IL)        

vacuumlad1650's profile picture
i think Jimmy Martin (Rugsucker) Has wands

Post# 353883 , Reply# 8   6/15/2016 at 22:06 (2,843 days old) by airway77 (NC)        
Air-Way Sanitizor 77 Wands...

Thanks vacuumlad1650...

I will contact him tomorrow.


Also, I have to ask a question meant for anyone who can answer...

If (Good Lord in Heaven please forbid) the motor should decide to malfunction beyond the realm of worn carbon brushes, are there replacements? I know that the Air-Way Company we all knew and loved is no more, but are there aftermarket models available (preferably Ametek-Lamb)? I know GE made the motors but the golden age of GE is rapidly fading in the rear-view mirror as well. I don't think I've ever used a Domel so I can't speak for their reliability, performance stats, noise level, etc. unless I have and didn't know that was the motor type...

Anyone who can answer (and I'm certain someone on here probably can) feel free to respond here in the thread!


Post# 353884 , Reply# 9   6/15/2016 at 22:10 (2,843 days old) by vacuumlad1650 (Wauponsee, IL)        

vacuumlad1650's profile picture
Calling Charlie Wotrous! AirWayCharlie, are you there??

Post# 353886 , Reply# 10   6/16/2016 at 01:06 (2,843 days old) by jimjimmunster (Hammond, Ind.)        
For Parts, Your Best Choice Would Be...

jimjimmunster's profile picture
For parts, I would suggest looking for a junker. an old beat up airway that is cheap, that would keep it close to original and not cost a fortune. best place to find those is in the garage of an estate sale or on eBay.

Post# 353887 , Reply# 11   6/16/2016 at 04:40 (2,843 days old) by Electrolux-dude (Canyon, TX)        
I might can help

Hey Tania this is Nathan, Electrolux dude, I think I have some wands for an Airway. If I recall correctly I'm thinking they are what you'd need. I'll be going out to "Vac-A-Ville, TX population 200-300, and I'll look and see if I can find those wands and get a picture of them. I've got at least a dozen or more of Airway machines. I can be reached by email at: thetrain1979@gmail.com. Sincerely, Nathan L. Thomas
Electrolux-dude


Post# 353890 , Reply# 12   6/16/2016 at 08:11 (2,842 days old) by airway77 (NC)        
Air-Way Sanitizor 77 Wands...

No offense BUT....

I'm not Tania Voigt....nowhere close. Please do not compare my rookie collector and enthusiast little self to the Goddess of the Vacuum Collecting world. :)

Concerning the motor question...

Air-Way isn't too common in my part of NC (or NC in general from what I can tell) so yard/estate sales are slim pickings (unless it's Aerus-Electrolux...they're everywhere!!). What about ESSCO or similar sites? As always, eBay is a good place...that's where I bought the Air-Way to begin with!!

Also, where can I find decent bojack bags? Based on past experience with bags sold on Amazon I'm extremely wary of the bags there unless I have no good alternative option.

Thanks! Please let me know here!


Post# 353893 , Reply# 13   6/16/2016 at 08:53 (2,842 days old) by rugsucker (Elizabethton TN)        
AirWay

In Toms picture 2 above that 'dent' in the edge of the wand is not because it was dropped but is one of many clever reasons that 'AirWay was the best Way'.When the wands are twisted sideways a pin under the edge of wand is pressed down causing the spring mounted bristle strip to extend further downward for picking up threads,etc.
airway77,
"my part of NC"If you are in western NC you would be close to me and LOTS of vacs and parts including much AirWay.I am very easy to get to from Asheville,Charlotte,Hickory,Boone and other areas.I know where most AW parts are and have 3 at the bench & 3 more in center hallway.Also many 55 & 66.Even so it might take some searching for some items.Best to call.
Jimmy--423-268-4841


Post# 353894 , Reply# 14   6/16/2016 at 09:21 (2,842 days old) by kirbysthebest (Midwest)        

Bags can be found on Ebay.  I have even purchased Old stock originals at times.

 

Tom Gasco directed me towards the Eureka Direct Ebay store a few years ago.  You can purchase replacement bags that are fair performers for Air-way,  double layered, microlined.  Nowhere as good as the orginials. 

 

Tom has also given instructions on how to save the top of the bag and use the Tacony bags as replacements.


Post# 353896 , Reply# 15   6/16/2016 at 10:02 (2,842 days old) by airway77 (NC)        
Air-Way Sanitizor 77 Wands...

Rugsucker...

I'm in the Piedmont....near Greensboro and Winston-Salem metro area.

Solid two/two and a half hours driving time from Boone and even further from Asheville.


Post# 353912 , Reply# 16   6/16/2016 at 17:26 (2,842 days old) by airway77 (NC)        
Air-Way Sanitizor 77 Wands...

Hi All...

Anyone who knows where I can find the lower wand OR if you have one that you are willing to sell to me please contact me via the email address in my profile.

I checked eBay and Craigslist with no luck....

Thanks!!!


Post# 353914 , Reply# 17   6/16/2016 at 18:26 (2,842 days old) by kenkart ()        
Re Piedmont..

I'm in Mocksville and work in Winston. I don't think I have any Airway spare wands. but I do have a bunch of vacuums you might like to see.Hans

Post# 353917 , Reply# 18   6/16/2016 at 20:19 (2,842 days old) by airway77 (NC)        
Air-Way Sanitizor 77 Wands...

Kenkart....

Mid-century canisters???
I'm intrigued.....

I've always found the RCA/Whirlpool and their badge-engineered Kenmore counterparts interesting....

What Air-Way machines do you own?


Post# 353925 , Reply# 19   6/16/2016 at 23:01 (2,842 days old) by kenkart ()        
I have 2 or 3

55s. a 66 and a 77. 2 88s and 4 or 5 from the 70s and 80s including a Vita Vac.In the Kenmores I have several Ken Karts and tanks . 45 early round canisters and several of the 50s and 60s square metal models. Kenmores are among my favorites.I also have a RCA Bambi.I have a 58 Lady Kenmore on the cart with the powermate.

Post# 353926 , Reply# 20   6/16/2016 at 23:03 (2,842 days old) by kenkart ()        
And TONS

Of mid century canisters as that is what I collect mostly. Constellations. GEs Westinghouses a Cadillac and several Apexes and Wards.

Post# 353956 , Reply# 21   6/17/2016 at 17:28 (2,841 days old) by airway77 (NC)        
Air-Way Sanitizor 77 Wands...

Kenkart....

I am even further interested.

You wouldn't happen to have a RCA/Whirlpool Bambi?? My grandmother had one forever; the motor finally blew in it (she threw it out...) and it was replaced with a refurbished Lux Epic 6500SR....


Also....any other leads on wands??? Waiting to hear back from Nathan Thomas...


Post# 353986 , Reply# 22   6/18/2016 at 07:16 (2,840 days old) by kenkart ()        
Yes..

I have a Bambi, neat little cleaner. found bags for it in Lexington at Laniers Hardware. I bought a pickup truck bed full of all kinds of odd bags.

Post# 354005 , Reply# 23   6/18/2016 at 10:51 (2,840 days old) by Dysonman1 (the county)        

dysonman1's profile picture
I have an extra lower wand that you will need for your model 77. I'm willing to part with it for the price of postage.

  View Full Size
Post# 354010 , Reply# 24   6/18/2016 at 11:54 (2,840 days old) by rugsucker (Elizabethton TN)        
RCA Bambi

I have only found one Bambi and think it is still upstairs.It is same color and label as above but machine only.Label is OK buy not perfect.Paint is good to bad with some surface rust.Don't remember motor condition.When I come to it again it needs a new home along with MANY others if interested.

Post# 354014 , Reply# 25   6/18/2016 at 14:31 (2,840 days old) by airway77 (NC)        
Air-Way Sanitizor 77 Wands...

Dysonman1 (aka Tom Gasko),

Feel free to use the email in my profile to contact me regarding the wand.


As for the Bambi......I'm not really interested but it brings plenty of nostalgia and good memories of cleaning my grandparents home.

Also, for any of you who may end up in the Lexington, NC area: Lanier's TrueValue is a GOLD MINE. I bought a NOS Eureka 1934A there for $89.99 a while back and they still have some in stock (along with several World Vac and Rally power teams) as of two months ago. They also carry tons of bags!! It's a great place; family-run as a TrueValue franchise with very friendly staff.

Thanks!


Post# 354061 , Reply# 26   6/19/2016 at 10:53 (2,839 days old) by airway77 (NC)        
Air-Way Sanitizor 77 Wands...

Thank you ALL for your assistance!!

Tom Gasko came through with what I need. Tom---THANK YOU!!!!!

Also, thank you all for welcoming my rookie self to the Forums. I hope to post at least some of my collection in the near future.


--Steven


Post# 354071 , Reply# 27   6/19/2016 at 13:32 (2,839 days old) by gsohoover (Reidsville, NC)        
Bambi

Hi everyone, I just got a Bambi from Sean Curry (Thank You Sean! :-D ) but it is missing a few things. Some of the attachments and the wands. The machine doesn't look like Toms, it looks like Hans' machine. As for Air-Way wands, I have an extra set or two.
Thank You,
-Tyler


Post# 354228 , Reply# 28   6/21/2016 at 12:32 (2,837 days old) by airway77 (NC)        
Air-Way Sanitizor 77 Wands...

Thanks for all of your help!

I hope to receive the new wand soon from Tom Gasko...



Forum Index:       Other Forums:                      



Comes to the Rescue!

Woops, Time to Check the Bag!!!
Either you need to change your vacuum bag or you forgot to LOG-IN?

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy