Thread Number: 31625
/ Tag: Recent Vacuum Cleaners from past 20 years
My New Old Kirby Heritage 2! |
[Down to Last] |
Post# 349440   4/3/2016 at 18:38 (2,943 days old) by SharkCar19998 (Michigan)   |   | |
Checkrate/Likes
 
4    
Hey guys I just wanted to tell you guys about my latest gem. My Kirby heritage 2. She runs very smooth but it must have not been used since around 2001ish because it's really dusty like it was in storage. It's really nice I'm in love. I went to goodwill and saw it and I decided nah I don't want it for $20. But I had second thoughts so I went back an hour and half later and I got it. And I got half off! That's right $10! That's because the employees know me as the vacuum boy so I got it half off and I'm so glad because it's run so smooth and AMAZING
View Full Size
|
Post# 349444 , Reply# 1   4/3/2016 at 19:22 (2,943 days old) by Brando_husky (Las Vegas Nevada)   |   | |
Checkrate/Likes
 
     
Nice machine. That was my first kirby and my first vacuum in my collection several years ago. |
Post# 349445 , Reply# 2   4/3/2016 at 19:26 (2,943 days old) by KirbyCollector (Columbus Ohio USA)   |   | |
Checkrate/Likes
 
1    
|
Post# 349448 , Reply# 3   4/3/2016 at 19:34 (2,943 days old) by Brando_husky (Las Vegas Nevada)   |   | |
Checkrate/Likes
 
     
Haven't seen this picture since 2009.
View Full Size
|
Post# 349454 , Reply# 4   4/3/2016 at 20:13 (2,943 days old) by SharkCar19998 (Michigan)   |   | |
Checkrate/Likes
 
     
|
Post# 349455 , Reply# 5   4/3/2016 at 20:14 (2,943 days old) by Brando_husky (Las Vegas Nevada)   |   | |
Checkrate/Likes
 
     
If you are behind the machine looking at the emptor it twists counter clockwise off. |
Post# 349462 , Reply# 6   4/3/2016 at 21:46 (2,943 days old) by suckolux (Yuba City, CA)   |   | |
Checkrate/Likes
 
     
|
Post# 349472 , Reply# 7   4/3/2016 at 23:53 (2,943 days old) by human (Pines of Carolina)   |   | |
Checkrate/Likes
 
     
|
Post# 349480 , Reply# 8   4/4/2016 at 01:46 (2,943 days old) by CharlesKirby66 (Manteca, CA)   |   | |
Checkrate/Likes
 
1    
Congrats! Your machine will clean up beautifully. I just put a new headlight lens assembly on mine today. I wish I had the Heritage II label for my Belt Lifter.
|
Post# 349499 , Reply# 9   4/4/2016 at 10:57 (2,943 days old) by sptyks (Skowhegan, Maine)   |   | |
Checkrate/Likes
 
1    
|
Post# 349532 , Reply# 10   4/4/2016 at 21:23 (2,942 days old) by SharkCar19998 (Michigan)   |   | |
Checkrate/Likes
 
     
|
Post# 349540 , Reply# 11   4/4/2016 at 22:33 (2,942 days old) by human (Pines of Carolina)   |   | |
Checkrate/Likes
 
2    
|
Post# 349554 , Reply# 12   4/5/2016 at 06:37 (2,942 days old) by SharkCar19998 (Michigan)   |   | |
Checkrate/Likes
 
     
|
Post# 349568 , Reply# 13   4/5/2016 at 10:13 (2,942 days old) by sptyks (Skowhegan, Maine)   |   | |
Checkrate/Likes
 
2    
|
Post# 349600 , Reply# 14   4/5/2016 at 14:23 (2,942 days old) by human (Pines of Carolina)   |   | |
Checkrate/Likes
 
2    
You can use very fine steel wool (#000 or #0000) with the Mother's polish and get some decent results, although it won't take out deep scratches. I got my G5 up to a sort of satiny sheen from that 'dead lead' look with a wet paste of Barkeeper's Friend and water on a shop towel, then followed it up with Mother's. The Barkeeper's Friend almost instantly got rid of the oxidation and then the more I rubbed it, the shinier it got, up to a certain point. One of these days when I get a little free time--like that will ever happen--I may go back and work on it some more.
|
Post# 349617 , Reply# 15   4/5/2016 at 21:47 (2,941 days old) by suckolux (Yuba City, CA)   |   | |
Checkrate/Likes
 
     
|
Post# 349635 , Reply# 16   4/6/2016 at 10:13 (2,941 days old) by SharkCar19998 (Michigan)   |   | |
Checkrate/Likes
 
2    
|