Thread Number: 31098
/ Tag: 50s/60s/70s Vacuum Cleaners
Kirby brush roll upgrade ?? |
[Down to Last] |
Post# 343556 , Reply# 1   2/11/2016 at 17:25 (2,989 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
|
Post# 343558 , Reply# 3   2/11/2016 at 18:00 (2,989 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
|
Post# 343560 , Reply# 4   2/11/2016 at 18:18 (2,989 days old) by slomo ()   |   | |
Checkrate/Likes
 
     
Another satisfied customer. Thanks again Ben. slomo |
Post# 343563 , Reply# 5   2/11/2016 at 18:45 (2,989 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
|
Post# 343668 , Reply# 8   2/12/2016 at 11:45 (2,988 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
152585 was the part number for the brush roll with the magnet on the small end, as used on Heritage II machines from March 1986 to October 1987.
152581 was the part number for the brush roll without the magnet, as used on all Heritage I machines and Heritage II machines built between September 1984 and February 1986. Here is part number 152581 if you desire: http://www.ebay.com/itm/Kirby-152581-Her... ~Ben |
Post# 343694 , Reply# 10   2/12/2016 at 13:51 (2,988 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
|