Thread Number: 24521
Ebay Heritage (took a licking, keeps on ticking)
[Down to Last]

Vacuumland's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate vacuumland.org if you make a purchase using any link to eBay on this page]
Post# 274602   4/3/2014 at 07:48 (3,647 days old) by Anachronism ()        

My accomplice wanted to give some special friends a basic, reliable vac, and decided on a Kirby Heritage II or Legend. After watching thrift stores & internet listings with no luck, we took a shot at one on Ebay that was listed as "Runs Great". It arrived dumped into a pair of telescoped moving boxes with no packing. It still had a half full bag on OLDE dirt in it! When powered up, it vibrated. I unhooked the belt to eliminate the brush roll as a possible cause, and after less than a second the fan exploded. Since the motor did run, and the rest of it seemed salvageable, I ordered a new fan & proceeded to take it apart.

Kirbys are TOUGH! The screws were rusted from long storage in a damp location, the belt pulley would not unscrew, so I cut the remains of the fan hub off the shaft & used a pair of pipe wrenches to overcome the rust in the threads. Closer inspection revealed a shot-peening job on the inside of the fan housing that would suggest it sucked up a gravel road bed (the erosion on the remaining fins of the fan would indicate the same). A "pimple" on the exterior near the emptor connection turned out to be the point of impact from some hard object swallowed years earlier. The rear axle was bent, giving the wheels a 'reverse camber'. All in all, this one has had more use than our 510 & 'C' combined, and yet still could be resurrected for more years of service.


Post# 274633 , Reply# 1   4/3/2014 at 15:03 (3,647 days old) by TASE (Colorado)        

tase's profile picture
Do you have any pictures from this? I love to see abused Kirby's turn into happy Kirby's.

It is amazing what some people do with $1000 vacuums. If I could find a post I made about my Sentria II, I would. In a little over a year, the front bearing was rust-locked, the tech drive was water damaged, the thing shined less than my Classic III when I got it, the brush roll bearings were rusted, and the bag had bursted.


Post# 274661 , Reply# 2   4/3/2014 at 16:46 (3,647 days old) by Anachronism ()        

I didn't bother taking pics as I went, as I did not expect the mess I found. Fortunately this one was not submerged, but was stored in a very inhospitable environment. Judging by what I saw, someone got their thousand dollar's worth of service from it before it was retired. I read some of your other posts, so it appears we are of a similar mindset regarding the preservation of good time proven equipment. We still use "His & Her's" model L Gravely garden tractors from 1952 & 1966 respectively, my shop is equipped with an 1890 vintage turret lathe, as well as many other machine tools dating from 1910 through the '50s.

BTW, I sent the seller a note suggesting his description of this one was flawed



Forum Index:       Other Forums:                      



Comes to the Rescue!

Woops, Time to Check the Bag!!!
Either you need to change your vacuum bag or you forgot to LOG-IN?

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy