Thread Number: 24463
Royal Brush Rolls - 1993 |
[Down to Last] |
Post# 273920   3/28/2014 at 22:41 (3,674 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
|
Post# 273921 , Reply# 1   3/28/2014 at 22:42 (3,674 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
|
Post# 273931 , Reply# 2   3/29/2014 at 00:20 (3,674 days old) by ornery (Northeast Ohio)   |   | |
Checkrate/Likes
 
     
|
Post# 273933 , Reply# 3   3/29/2014 at 02:34 (3,674 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
John,
Me neither. They can be divided into three different classes: BALL BEARING ROLLS (NEW STYLE WITH HEX ENDS) 2-655225-000 - 14" Helical Ball Bearing Brush Roll 2-673273-000 - 14" Ball Bearing Brush Roll w/Stiffener 2-692225-000 - 18" Helical Ball Bearing Brush Roll BALL BEARING ROLLS (SQUARE ENDS - FOR ORIGINAL SLEEVE BEARING NOZZLES ONLY) 2-675221-000 - 14" Helical Ball Bearing Brush Roll 2-675227-000 - 14" Ball Bearing Brush Roll w/Stiffener 2-695227-000 - 18" Helical Ball Bearing Brush Roll SLEEVE BEARING ROLLS (METAL NON-REMOVABLE SQUARE ENDS - FOR ORIGINAL SLEEVE BEARING NOZZLES ONLY) 2-059721-000 - 14" Multi-Purpose Brush Roll (for machines 5.4 amp or lower) 2-801226-000 - 14" Helical Commercial Brush Roll 2-088221-000 - 14" Helical Brush Roll w/Stiffener (for 6.0 and 7.0 amp machines only) SLEEVE BEARING ROLLS (METAL REMOVABLE SQUARE ENDS - FOR ORIGINAL SLEEVE BEARING NOZZLES ONLY) 2-161273-000 - 18" Helical Commercial Brush Roll OPTIONAL 2-012321-000 - Carpet Pile Lifter Brush and Bare Floor Polisher (w/sleeve bearing) 2-012326-000 - (like 2-012321-000 with ball bearing) 2-088021-000 - 14" Berber Brush Roll (w/sleeve bearing) 2-088026-000 - (like 2-088021-000 with ball bearing) 2-088050-000 - Upright Felt Polisher Pad ~Ben |
Post# 274271 , Reply# 4   3/30/2014 at 21:57 (3,672 days old) by hygiene903 (Galion, OH)   |   | |
Checkrate/Likes
 
     
I didn't know they still made the pile lifter/floor polisher brush. It was included in the extra accessories kit they used to sell along with a sprayer and the small bag, short handle, and cord with inline switch to convert it to a hand vac. Here is a pic of a grey attachment set, and below, the extra equipment kit.
Jeff |
Post# 278757 , Reply# 5   4/30/2014 at 14:50 (3,642 days old) by KirbyClassicIII (Milwaukie, Oregon)   |   | |
Checkrate/Likes
 
     
|
Post# 278759 , Reply# 6   4/30/2014 at 15:20 (3,642 days old) by ornery (Northeast Ohio)   |   | |
Checkrate/Likes
 
     
Sheesh Ben, you pick up on things 99% of the population probably never notices... myself included!
Now that you mention this, I'm going to guess the 180 degree bristles will have the better sweeping action, but wouldn't be adventitious for the "thumping" action of a stiffener. A stiffener wound around 180 degrees, would have more of a shearing action than beating. |
Post# 278788 , Reply# 7   4/30/2014 at 17:52 (3,641 days old) by ornery (Northeast Ohio)   |   | |
Checkrate/Likes
 
     
|