Thread Number: 22538
Out with the new in with the old. |
[Down to Last] |
Post# 252085   10/5/2013 at 05:26 (3,848 days old) by Blackheart (North Dakota)   |   | |
Checkrate/Likes
 
     
I harvested the motor from a tristar EXL to put into my MG2 the EXL motor pulls 3x the flow according to my baird meter. The Mg2 uses the VM3 motor and i've been dissapointed with it's power.
So first off here's the motors On the left you see the VM3 which is a single stage motor it also seems to be very poorly made i can't see any way to get into it doesn't even use a bolt on the fan it's this weird washer type of thing holding on the fan on And on the right the EXL motor which is the same motor used in the Lux 6500 |
Post# 252086 , Reply# 1   10/5/2013 at 05:28 (3,848 days old) by Blackheart (North Dakota)   |   | |
Checkrate/Likes
 
1    
|
Post# 252091 , Reply# 2   10/5/2013 at 07:49 (3,848 days old) by gsheen (Cape Town South Africa)   |   | |
Checkrate/Likes
 
     
|
Post# 252094 , Reply# 3   10/5/2013 at 08:36 (3,848 days old) by Blackheart (North Dakota)   |   | |
Checkrate/Likes
 
     
|
Post# 252095 , Reply# 4   10/5/2013 at 08:46 (3,848 days old) by gsheen (Cape Town South Africa)   |   | |
Checkrate/Likes
 
     
|