Thread Number: 19033
Royal 801 Polish - Before & After pics |
[Down to Last] |
Post# 209872   12/14/2012 at 01:38 (4,144 days old) by nubz3760 ()   |   | |
Checkrate/Likes
 
     
I decided to pick up some mothers polish and give my old royal some love. Before 1 |
Post# 209874 , Reply# 1   12/14/2012 at 01:40 (4,144 days old) by nubz3760 ()   |   | |
Checkrate/Likes
 
     
Before 2 |
Post# 209875 , Reply# 2   12/14/2012 at 01:41 (4,144 days old) by nubz3760 ()   |   | |
Checkrate/Likes
 
     
Before 3, I repaired the cord while I had everything apart |
Post# 209876 , Reply# 3   12/14/2012 at 01:43 (4,144 days old) by nubz3760 ()   |   | |
Checkrate/Likes
 
     
This is when I first started. You'll notice (your left) side of the nozzle is slightly shinier |
Post# 209877 , Reply# 4   12/14/2012 at 01:46 (4,144 days old) by nubz3760 ()   |   | |
Checkrate/Likes
 
     
by this time my fingers were hurting so I pulled out the dremel with a small buffing wheel on it. I had to go over all parts by hand again to even out the shine, but it made short work of everything :-) |
Post# 209878 , Reply# 5   12/14/2012 at 01:47 (4,144 days old) by nubz3760 ()   |   | |
Checkrate/Likes
 
     
At this point I was very eager to see what the finished product would look like |
Post# 209879 , Reply# 6   12/14/2012 at 01:49 (4,144 days old) by nubz3760 ()   |   | |
Checkrate/Likes
 
     
Things are starting to come together. I have the nozzle and fancase mostly completed, just need another once over |
Post# 209880 , Reply# 7   12/14/2012 at 01:50 (4,144 days old) by nubz3760 ()   |   | |
Checkrate/Likes
 
     
Shining up the motor. I also fixed the cord at this time |
Post# 209881 , Reply# 8   12/14/2012 at 01:52 (4,144 days old) by nubz3760 ()   |   | |
Checkrate/Likes
 
     
Here she is, and all her shiny metal glory :-) I think it came out nice, I could have done a better job if I spent more time on it but I work full time. Tell me what you guys think. |
Post# 209882 , Reply# 9   12/14/2012 at 01:53 (4,144 days old) by nubz3760 ()   |   | |
Checkrate/Likes
 
     
nozzle |
Post# 209883 , Reply# 10   12/14/2012 at 01:54 (4,144 days old) by nubz3760 ()   |   | |
Checkrate/Likes
 
     
turned off the flash because it was ruining the mirror effect |
Post# 209884 , Reply# 11   12/14/2012 at 01:55 (4,144 days old) by nubz3760 ()   |   | |
Checkrate/Likes
 
     
from the side |
Post# 209885 , Reply# 12   12/14/2012 at 01:57 (4,144 days old) by nubz3760 ()   |   | |
Checkrate/Likes
 
     
I am very happy with the results! It looks 20 years younger. I wish it didnt have those scratches on the nozzle but thats what you get with 50 years of use |
Post# 209888 , Reply# 13   12/14/2012 at 03:54 (4,144 days old) by gsheen (Cape Town South Africa)   |   | |
Checkrate/Likes
 
     
|
Post# 209896 , Reply# 14   12/14/2012 at 06:52 (4,144 days old) by kirbyvacuum (Long Island New York)   |   | |
Checkrate/Likes
 
     
Hi Nick Very nicejob .Their is no wasy way to get the shine up is their. I have a few Kirbys waiting to look their best but an not looking foward to working on then. Take care Doug |
Post# 210103 , Reply# 16   12/15/2012 at 21:59 (4,142 days old) by hygiene903 (Galion, OH)   |   | |
Checkrate/Likes
 
     
|