Thread Number: 16122
NOS Electrolux AQUA Sheath Cords
[Down to Last]

Vacuumland's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate vacuumland.org if you make a purchase using any link to eBay on this page]
Post# 171851   3/4/2012 at 12:20 (4,406 days old) by pnluxconvlvr (Georgia)        

pnluxconvlvr's profile picture
I found these cords by chance when searching for a cord and ordered and got one. This is pretty cool that these are even available.

CLICK HERE TO GO TO pnluxconvlvr's LINK


Post# 171852 , Reply# 1   3/4/2012 at 12:21 (4,406 days old) by pnluxconvlvr (Georgia)        
Here is the other aqua cord.

pnluxconvlvr's profile picture
Post# 171853 , Reply# 2   3/4/2012 at 12:24 (4,406 days old) by pnluxconvlvr (Georgia)        
This aqua elbow is a find too.

pnluxconvlvr's profile picture
Can't tell if it is PN1 or PN2 from the description or where one would get the chrome top to seal in the tab but still a neat part :)

CLICK HERE TO GO TO pnluxconvlvr's LINK


Post# 172402 , Reply# 3   3/7/2012 at 18:27 (4,403 days old) by vacman1961 (North Babylon, New York)        

None of those items are OEM Aerus-Electrolux, they are a generic knock off in blue color.

Post# 172414 , Reply# 4   3/7/2012 at 19:49 (4,403 days old) by pnluxconvlvr (Georgia)        
I have ordered two of them.......

pnluxconvlvr's profile picture
And they were in fact NOS exact matching "aqua" that even had some dust and some light spots on one side that wiped off with the same markings as an originall cord I had. Thanks

Post# 172416 , Reply# 5   3/7/2012 at 19:54 (4,403 days old) by pnluxconvlvr (Georgia)        
Nice aqua hose cord or for PN1 restoring.

pnluxconvlvr's profile picture
This is also a nice aqua cord for an Electrolux hose that I ordered and cut one to use as a new PN1 cord to sheath that worked great. :)

CLICK HERE TO GO TO pnluxconvlvr's LINK


Post# 172418 , Reply# 6   3/7/2012 at 20:02 (4,403 days old) by pnluxconvlvr (Georgia)        
For a fellow collector or enthusiast.......

pnluxconvlvr's profile picture
.......I hope knowing where to find a matching cord would help, as it is often hard to search for parts and remember where they are located. :)

Post# 172425 , Reply# 7   3/7/2012 at 21:37 (4,403 days old) by Real1 ()        
Thanks....

for the links!  I ordered an aqua cord that was over 72" long (not on purpose)....not at all what I needed.  That was the one in your last link.  I just need the wand cord for the PN2.....so your second link looks like the right one; 40" OEM for a PN2.Laughing

 

Kevin


Post# 172438 , Reply# 8   3/7/2012 at 22:45 (4,403 days old) by pnluxconvlvr (Georgia)        
That's great Kevin :)

pnluxconvlvr's profile picture
That is the one I ordered as well for my PN2. It fits great. I had to use a Clorox wipe (the only wipes that work well for me on paint scuffs and stains) to remove some age spots / stains to make it perfect, but it is a nice cord. I wish the aqua PN2 nozzle to sheath cord was still available. I am waiting on an aqua sheath to come to replace the one I have that is too green and does not match. Now my 1205 will have a PN1 with aqua direct connect telescoping wand and a PN2 with aqua sheath and cord. I will post a pic when I complete it :) I think I have a power nozzle fetish :)

Post# 172442 , Reply# 9   3/7/2012 at 23:02 (4,403 days old) by Real1 ()        
Tyler....

do post some pics when you're ready! I have an early PN1 and a very late PN1 restored.....I have a 'Anniversary ' PN2 that I've yet to restore. That Teflon/metal friction ring arrangement at the top of the telescoping wand ( that grips the metal hose end).....are those replaceable somehow? I see they're riveted in....but was just wondering. That's the only thing keeping one of my telescoping wands from working again.

 

Kevin 


Post# 172444 , Reply# 10   3/7/2012 at 23:20 (4,403 days old) by pnluxconvlvr (Georgia)        
Friction ring.

pnluxconvlvr's profile picture
I bought a new ring and tried to get the chromed top off an elbow to no avail. I would ask a local vac shop if they can do the rivets on the wand as I have seen a replacement motor in a PN2 I reconditioned that someone had riveted the original reset / plug assembly on so I know it can be done. I wish I had the tool to do it. I reconditioned a 50th Anniversary PN2 last year and sold with a second 1205 I had and regret it now. I finally got myself a B Day gift I have been searching forever for this month and bought an absolutely MINT Electrolux Golden Jubilee. It was missing everything but the crevice tool. I just ordered a new hose and sheath set and am waiting on a matching nice 50th Anniversary PN2 to recondition to complete it. I am so excited how beautiful this Electrolux will be to me. :)

Post# 172447 , Reply# 11   3/7/2012 at 23:25 (4,403 days old) by pnluxconvlvr (Georgia)        
Here is the 50th PN2 I sold.

pnluxconvlvr's profile picture
I regret it. I will make the one I am getting look this way again after hours of cleaning and replacing maintence items and rubbing my arm off with metal polish. I'm not letting the next one go.


Forum Index:       Other Forums:                      



Comes to the Rescue!

Woops, Time to Check the Bag!!!
Either you need to change your vacuum bag or you forgot to LOG-IN?

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy