Thread Number: 10866
I finally opened the box |
[Down to Last] |
Post# 117401   12/7/2010 at 09:29 (4,860 days old) by jfalberti (Visalia, CA)   |   | |
Checkrate/Likes
 
     
|
Post# 117402 , Reply# 1   12/7/2010 at 09:30 (4,860 days old) by jfalberti (Visalia, CA)   |   | |
Checkrate/Likes
 
     
|
Post# 117404 , Reply# 2   12/7/2010 at 09:39 (4,860 days old) by jfalberti (Visalia, CA)   |   | |
Checkrate/Likes
 
     
piled in the box with packing paper on top and on the bottom. Nothing around the handle fork or the mini emptor. Just metal against metal and plastic against metal. I assembled the Kirby and attached the bag. When I looked in the bag, it had a cloth genuine Kirby Hepa filter bag, like the ones I just bought from Bill (A007Kirbyman). Difference is this one included the previous owner's dirt - no additional charge! The outter bag is really clean though. I powered it up and test ran it, and it works like a charm. It could be my imagination, but I think the Tech Drive on this one is even smoother than the one on my G4. Motor sounds good, belt is new, and brushroll looks very clean. I vacuumed the bedroom with it last night, and it did a wonderful job. Now, just to get what I need to give this girl the spa treatment that she so desperately needs.
|
Post# 117418 , Reply# 4   12/7/2010 at 12:11 (4,860 days old) by kirbylux77 (London, Ontario, Canada)   |   | |
Checkrate/Likes
 
     
My newest Kirby is my Kirby G6 2001 Limited Edition, just 2 models behind your Ultimate G Diamond Edition. I have noticed the tech drive is smoother on the G6 than my Kirby G4 80th Anniversary Edition. I think when the G4 came out, they were just starting to iron out the kinks with the tech drive & probably had it perfected by the G5.
Congratulations on the new Kirby, & hope you enjoy it. And please post some pics for us all once it's cleaned up. Rob |
Post# 117716 , Reply# 5   12/10/2010 at 08:15 (4,857 days old) by thermokid (Casper, Wyoming)   |   | |
Checkrate/Likes
 
     
I know what you mean about your Kirby Diamond Edition. I vacuum with other vacuums and it just doesn't seem clean. Even when I use my new Sentria, I always go back to my Diamond.... |
Post# 117773 , Reply# 6   12/10/2010 at 21:47 (4,857 days old) by eurekastar (Amarillo, Texas)   |   | |
Checkrate/Likes
 
     
|
Post# 117962 , Reply# 7   12/13/2010 at 00:44 (4,855 days old) by djtaylor (Salt Lake City, Utah)   |   | |
Checkrate/Likes
 
     
To Kirbylux77, I started working in a Kirby shop about 8 or 9 months before the G4 was replaced with the G5. Compared to the Generation 3, the G4 Tech Drive was SO much better. I did a lot of warranty work on G3, and I mean a LOT. The Tech Drive would kick into gear fairly easily, sometimes when the user had the hose on and were cleaning above-floor. That was fixed with the 'split pedel' design. The G3 was plagued with problems. The power switch broke, very easily, where the cord plugged in. The handle pivot assembly's spring wore out very fast. Kirby fixed them for the G4. I have had two G3's, one now lives with my mom, and I replaced every one of the 'problem' parts. And they were much better cleaners for it.
Justin |