| Thread Number: 2342 hoover convertible problem..... |
Post# 25589-11/30/2007-20:25 ||| decade80 (Alliance,OH) |
|
Recently I changed the belt on my Hoover convertible because there was a crack in the old belt. After I installed the new belt I ran it with the new belt...everything went ok at first until the motor started slowing down....I imediately turned the vacuum off to see what was causing it and I found nothing....I put the old belt back on for now.....does anyone know what's wrong? |
Post# 25593-11/30/2007-21:25 ||| myhooverco (North Canton, OH) |
|
Does the agitator turn freely without the belt? Maybe it needs freed up a bit. Is this the Convertible with the plastic base and plastic endcaps on the agitator? Could the belt be on wrong?
|
Post# 25597-11/30/2007-21:57 ||| decade80 (Alliance,OH) |
|
its a convertible 1010.....I'll just keep the old belt on for now. |
|
Hoover Problem
Check the agitator I also have a hoover convertable with the same problem and I found out that it was the agitator. I think you can purchase one on Ebay CHEAP!!! no doubt about it. Email me at magvac1004@yahoo.com and we can tlk more about your problem |